Installing The Printer On A Wired Network - Lexmark C54x Series User Manual

9
Select the printer from the list.
10
Click Add.

Installing the printer on a wired network

Use the following instructions to install the printer on a wired network. These instructions apply to Ethernet and fiber
optic network connections.
Before you install the printer on a wired network, make sure that:
•
You have completed the initial setup of the printer.
•
The printer is connected to your network with the appropriate type of cable.
For Windows users
1
Insert the Software and Documentation CD.
Wait for the Welcome screen to appear.
If the CD does not launch after a minute, then do one of the following:
In Windows Vista
a
Click .
b
In the Start Search box, type D:\setup.exe, where D is the letter of your CD or DVD drive.
In Windows XP and earlier
a
Click Start.
b
Click Run.
c
Type D:\setup.exe, where D is the letter of your CD or DVD drive.
2
Click Install Printer and Software.
3
Click Agree to agree to the License Agreement.
4
Select Suggested, and then click Next.
Note: To configure the printer using a static IP address, using IPv6, or to configure printers using scripts, select
Custom and follow the on-screen instructions.
5
Select Wired Network Attach, and then click Next.
6
Select the printer manufacturer from the list.
7
Select the printer model from the list, and then click Next.
8
Select the printer from the list of printers discovered on the network, and then click Finish.
Note: If your configured printer does not appear in the list of discovered printers, click Add Port and follow the
on-screen instructions.
9
Follow the on-screen instructions to complete the installation.
Additional printer setup
33