Pcl Emul Menu - Lexmark C54x Series User Manual

Menu item
Image Smoothing
On
Off

PCL Emul menu

Menu item
Font Source
Resident
Download
Flash
All
Font Name
Courier
Symbol Set
10U PC-8
12U PC-850
PCL Emulation Settings
Point Size
1.00–1008.00
Description
Enhances the contrast and sharpness of low-resolution images and
smooths their color transitions
Notes:
•
Off is the factory default setting.
•
Image Smoothing has no effect on images that are 300 dpi or higher
in resolution.
Description
Specifies the set of fonts used by the Font Name menu item
Notes:
•
Resident is the factory default setting. It shows the factory default set
of fonts downloaded into RAM.
•
Flash settings show all fonts resident in that option.
•
Flash option must be properly formatted and cannot be Read/Write,
Write, or password protected.
•
Download shows all the fonts downloaded into RAM.
•
All shows all fonts available to any option.
Identifies a specific font and the option where it is stored
Notes:
•
Courier is the factory default setting.
•
Courier shows the font name, font ID, and storage location in the
printer. The font source abbreviation is R for Resident, F for Flash, and
D for Download.
Specifies the symbol set for each font name
Notes:
•
10U PC-8 is the US factory default setting.
•
12U PC-850 is the international factory default setting.
•
A symbol set is a set of alphabetic and numeric characters,
punctuation, and special symbols. Symbol sets support the different
languages or specific programs such as math symbols for scientific
text. Only the supported symbol sets are shown.
Changes the point size for scalable typographic fonts
Notes:
•
12 is the factory default setting.
•
Point Size refers to the height of the characters in the font. One point
equals approximately 1/72 of an inch.
•
Point sizes can be increased or decreased in 0.25-point increments.
Understanding printer menus
96