Run The Wireless Setup Utility (Windows Users Only); Check Printer Ports (Windows Users Only) - Lexmark 6500 Series User Manual

Lexmark printer user's guide
Hide thumbs Also See for 6500 Series:
Table of Contents

Advertisement

2
Type ping followed by the IP address of the printer. For example,
ping 192.168.0.25
3
Press Enter.
4
If the printer responds, you will see several lines appear that start with "Reply from".
Turn off and restart the printer, and then try resending your print job.
5
If the printer does not respond, you will see "Request timed out."
a
Check that the computer has a wireless IP address.
1
Do one of the following:
In Windows Vista, click
In Windows XP, click Start
Prompt.
2
Type ipconfig.
3
Press Enter.
4
Check the Windows IP Configuration screen that appears for the wireless IP address of the computer.
Note: Your computer may have an IP address for a wired network, a wireless network, or both.
5
If your computer does not have an IP address, see the documentation that came with your wireless
access point (wireless router) to learn how to connect your computer to the wireless network.
b
The printer may need to be reconfigured for new wireless network settings. For more information, see "Run
the Wireless Setup Utility".

Run the Wireless Setup Utility (Windows users only)

1
Click Start
Programs or All Programs
2
Click Wireless Setup Utility.
Note: You may be prompted to connect the printer to the computer again using the installation cable as part of
the setup process.
3
Follow the instructions on the computer screen.

Check printer ports (Windows users only)

Make sure the correct printer port is selected.
1
Click Start
Control Panel
2
Right-click Lexmark XXXX, where XXXX is the model series number of your printer.
3
Click Properties
Ports.
4
Verify that XXXX_Series_nnnnnn_P1 is selected, where XXXX is the model series number of your printer and
nnnnnn is the last six numbers of the MAC address of your printer.
Note: The MAC address is located at the back of the printer beside the serial number.
5
If USB is selected instead:
a
Select the port name from step 4.
b
Click Apply.
c
Close the window, and try printing again.
All Programs
Programs or All Programs
Lexmark 6500 Series.
Printers.
153
Accessories
Command Prompt.
Accessories
Command

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents