White Lines Appear In Graphics Or Solid Black Areas; Checking The Printer Status - Lexmark 5300 Series User Manual

3
From the Quality/Copies tab, select:
•
Photo when printing photos
•
Normal when printing transparencies
A
LIGN THE PRINT CARTRIDGES
1
Do one of the following:
•
In Windows Vista, click
•
In Windows XP or 2000, click Start.
2
Click Programs or All Programs
3
Click Solution Center.
4
Click the Maintenance tab.
5
Click Align to fix blurry edges.

White lines appear in graphics or solid black areas

A Q
DJUST THE UALITY
•
For excellent print quality and reduced print speed, select Photo.
•
For good print quality and average print speed, select Normal.
•
For reduced print quality and faster print speed, select Quick Print.
A
DJUST THE PROGRAM SETTINGS FOR THE DOCUMENT
Use a different fill pattern in the program. For more information, see the program documentation.
P
ERFORM MAINTENANCE ON THE PRINT CATRIDGES
You may need to clean the print cartridge nozzles.

Checking the printer status

Windows Vista users only
1
Click Control Panel
2
Make sure:
•
The printer icon does not say Paused. If the printer is paused, right-click the icon, and then click Resume
Printing.
•
The printer icon says Ready. If it says Offline, right-click the icon, and then click Use Printer Online.
•
The printer icon has a check mark indicating that the printer is set as the default printer. If it is not, right-click
the icon, and then click Set as Default.
Control Panel.
Lexmark 5300 Series.
/S
PEED SETTINGS
Printer.
Troubleshooting
136