Configure Wpa-Personal (Psk) - D-Link DIR-685 Xtreme N User Manual

Secton  - Securty
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1..Log into the web-based configuration by opening a web browser
and entering the IP address of the router (192.168.0.1). Click on.
Setup.and then click.Wireless.Settings on the left side.
2. Next to Security Mode, select Enable.WPA/WPA2.Wireless.
Security.(enhanced).
3. Next to Cipher Type, select TKIP.and.AES, TKIP, or AES.
4. Next to Group Key Update Interval, enter the amount of time before
the group key used for broadcast and multicast data is changed
(3600 is default).
5. Next to Pre-Shared Key, enter a key (passphrase). The key is
entered as a pass-phrase in ASCII format at both ends of the
wireless connection. The pass-phrase must be between 8-63
characters.
6. Click Save.Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose
connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the router.
D-Lnk DIR-685 User Manual

Configure WPA-Personal (PSK)