Stylised Starter With Plastic Wedge - Tecumseh SPECTRA 37 Service And Repair Manual

For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
C - STYLISED STARTER WITH PLASTIC
WEDGE (Fig. 28-C)
This starter is similar to previous 'Stylised' starters except
that the Pawl Retainer (2) is now plastic, and has extended
lugs which pass through the starter and hold the assembly
together.
These lugs are locked in position by a plastic wedge (1)
which is inserted between the lugs from the top of the
starter.
NOTE - The plastic wedge may be covered by a decal,
which has to be carefully removed to gain access to the
wedge.
Fig. 28 - C
1. Plastic Wedge
2. Pawl Retainer
3. Pawls
4. Pawl Springs
5. Pulley
6. Spring
7. Cover
8. Housing
9. Rope
10. Handle
NOTE - Pulley (5), Spring (6), and Cover (7), are supplied
as an assembly when purchased for spare parts
purposes.
DISASSEMBLY/REASSEMBLY
- Release spring tension by unwinding rope.
- Remove decal (if fitted) and pry out the
plastic wedge.
- Holding starter assembly together in hand,
squeeze lugs together.
- Carefully remove pawl retainer.
- Inspect as for previous stylised starter.
- Re-assembly is the reverse of the above procedure
taking care to correctly locate the Pawl Retainer in the
Pawls.
NOTE - Parts for this starter are not interchangeable
with other starters.
15
www.mymowerparts.com
Fig. 28 - C