Correct Assembly Of Rope - Tecumseh SPECTRA 37 Service And Repair Manual

For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
Assembly
- To fit new rope, thread end through hole in gear and
knot.
- Rewind rope as per Fig 24.
- Place spring on gear and preload two turns. Lock by
inserting locking pin. (Fig 25).
- The assembly can now be fitted into the body paying
particular attention to position of the rope C and the
brake spring M. (Fig 26).
Fig 26. Correct assembly of rope
C. Rope passage
M. Spring brake
- Replace taper pin and remove locking pin. Checking
operation of starter.
- The gear should now move up and down the slot when
the rope is pulled and released. (Fig 27).
13
www.mymowerparts.com
Fig. 24
Fig. 25
Fig. 26
Fig. 27