Specifications - Snapper RZT26520 Operator's Manual

285z series zero turn rider
Hide thumbs Also See for RZT26520:
Table of Contents

Advertisement

Available languages

Available languages

Engine:
26 hp briggs & stratton
Make
Briggs & Stratton®
Model
26 hp PRO Twin
Horsepower
26 @ 3500 rpm
Displacement
44.0 cu in. (724 cc)
Electrical System Battery 12 Volt, 230 CCA
Alternator 16 amp
Oil capacity
64 oz (1,9 L) w/Filter
chassis:
fuel Tank
Capacity: 2.4 Gallons (9,1 L)
Rear Wheels
Tire Size: 18 x 9.50-8
Inflation Pressure: 15 psi (1,03 bar)
front Wheels
Tire Size: 11 x 4.00-5
Inflation Pressure: 25 psi (1,72 bar)
Parts and accessories
See an authorized dealer.
Power Rating
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained
and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepow-
er values are derived at 3600 RPM. Net power values are taken with exhaust and air cleaner installed whereas gross
power values are collected without these attachments. Actual gross engine power will be higher than net engine power
and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given the wide
array of products on which engines are placed, the gas engine may not develop the rated gross power when used in a
given piece of power equipment. This difference is due to a variety of factors including, but not limited to, the variety of
engine components (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambi-
ent operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and
capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.
en
Transmissions:
Make
Hydro Gear
Model
ZC-AHBB-2A7B-1DPX (LH)
ZC-DHBB-2A7C-1DPX (RH)
Type
EZT
Hydraulic fluid
Sealed Unit
Speeds
Forward: 0-6 MPH (0-9.66 km/h)
@ Specified rpm
Reverse: 0-3 MPH (0-4.83 km/h)
Dimensions:
Overall Length
75" (191 cm)
Overall Width
61" (155 cm)
Height
39" (99 cm)
Weight (approx.) 554 lbs (252 kg)

Specifications

29

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents