Maintenance
Replacing the print cartridges
The Lexmark X1100 Series has been designed to print using the following
cartridges.
Item:
Standard yield black cartridge
Standard yield color cartridge
Moderate use black cartridge
Moderate use color cartridge
Note: You can print using only the color cartridge, or with both
For information about ordering supplies, see page 8.
Before you install new or replacement print cartridges, remove the used
cartridges.
1
Make sure the All-In-One is on.
2
Lift the scanner unit until the scanner support keeps it open.
The print cartridge carrier moves and stops at the loading position
unless the All-In-One is busy.
3
Squeeze the tabs on the cartridge lids, and then lift the lids.
4
Remove the old cartridges. Store them in an air-tight container or
dispose of them.
5
If you are installing new cartridges, remove the stickers and
transparent tape from the bottom of the cartridges.
Warning:
a color cartridge and a black cartridge.
Do not touch the gold contact area on the cartridges.
Part number:
16
26
17
27
17