Sound Adjustment; Enjoying Surround Sound By Using Decoding Mode - Sony DAV-F500 Operating Instructions Manual

Sound Adjustment

Enjoying Surround Sound by Using Decoding Mode

You can enjoy surround sound simply by selecting one of the system's pre-programmed decoding
modes. They bring exciting and powerful sound of movie theaters into your home.
1
Press SYSTEM MENU.
2
Press X/x repeatedly until "DEC. MODE" appears in the front panel display, then press
or c.
3
Press X/x repeatedly until the decoding mode you want appears in the front panel
display.
Display Decoding mode
"A.F.D. STD" AUTO FORMAT
DIRECT
STANDARD
"A.F.D. MULTI" AUTO FORMAT
DIRECT MULTI
"PLII MOVIE" Dolby Pro Logic II
MOVIE
X/x/c,
Effect
Presents sound as it was recorded/encoded.
Depending on the source, the speakers that output sound will
vary.
2 channel source: Sound that is recorded in 2 channel (front left
and right channel) is also assigned to the surround left and right
channel. This mode outputs sound from the front left and right
speakers, surround left and right speakers, and subwoofer. The
center speaker does not output any sound.
Multi channel source: Depending on the source, speakers that
output the sound will vary.
Performs Pro Logic II movie mode decoding to the input signal
and produces five full-bandwidth output channels from 2
channel sources. This setting is ideal for watching videos of
overdubbed or old movies.
This mode outputs sound from all the speakers and subwoofer.
Sound may not be output from all speakers depending on the
source.
SYSTEM
MENU
59
GB