Table of Contents
Advertisement
4
Installation
CAUTION
Strictly comply with the following rules to prevent damage of the indoor units and human injury.
• Do not put a heavy article on the indoor unit or let a person get on it. (Even units are packaged)
• Carry in the indoor unit as it is packaged if possible. If carrying in the indoor unit unpacked by necessity, use buffering cloth or other material to not damage the unit.
• To move the indoor unit, hold the hooking brackets (4 positions) only.
Do not apply force to the other parts (refrigerant pipe, drain pan, foamed parts, resin parts or other parts).
• Hanging bolt pitch of air intake chamber side is different (centre position), make sure not to make mistake to install the setting direction.
• Carry the package by two or more persons, and do not bundle it with plastic band at positions other than specified.
External dimensions
Access panel
98
61-EN
Hanging bolt pitch 1205
Unit external dimension 1140
1100 (inside)
1100
Air filter
Ø92 knockout hole
(For air intake)
– 31 –
Hung-up
plate
31
Electrical control box
15
Under air intake type
Refrigerant pipe
103
connecting port Ø9.5
(Liquid side)
Refrigerant pipe
connecting port Ø15.9
(Gas side)
19
166
33
Drain pipe connecting port
for vinyl chloride pipe
Rear air intake type
163
(Inner dia, Ø32, VP25)
Unit external
dimension
210
(Unit: mm)
62-EN
Advertisement
Table of Contents
