How To Extend The Power Wiring - Samsung AR09HSFSJWKN User & Installation Manual

How to extend the power wiring

Items to prepare
(compressor and insulation tape should be prepared by an installation technician.)
Tools Crimping plier
Spec
MH-14
Shape
1. As shown in the figure, peel off the shields from the rubber/wire
of the power cable.
- Peel off 0.79inch(20mm) of the wire shields of the tube installed already.
2. Insert both sides of core wire of the power cable into the connection sleeve.
3. Using the crimps, compress the two points and flip it over
and compress another two points in the same location.
- The crimping dimension should be 8.0.
- After crimping it, pull both sides of the wire to
make sure it is firmly pressed.
4. Wrap it with the insulation tape twice and position your
contraction tube in the middle of the insulation tape.
5. Apply heat to the contraction tube to contract it.
6. After tube contraction work is completed, wrap it with the
insulation tape to finish.
- Incomplete wire connections can cause electric shock or a fire.
AR5000&A3050 CV HP_IB&IM_DB68-04937A_EN.indd 58
Connection sleeve Insulation tape
0.79xØ0.28inch
((20xØ7.0mm)(HxOD) 0.71inch(18mm)
English-58
Contraction tube (mm)
Width 1.97x Ø0.31inch
(50xØ8.0mm)(LxOD)
Power cable (provided by us)
0.79(20)
7.09(180)
Wire tube power cable
0.79(20)
Connection sleeve
Compress it 4 times
0.20inch(5mm)
1.57inch(40mm)
(Unit: inch(mm))
0.79(20) 0.79(20)
2.36(60)
4.72(120)
Comp. dim.
Insulation tape
Contraction tube
Insulation tape
2015/1/4 11:48:20