Outdoor Unit - Samsung AR09HSFSJWKN User & Installation Manual

Choosing the installation location

Outdoor Unit

Where it is not exposed to strong wind
Well ventilated and dustless places
Where possible keep out of sunlight and rain
Where neighbors are not annoyed by operation sound or hot air
Solid wall or support that prevents vibration and is strong enough to hold the product weight
Where there is no risk of flammable gas leakage
When installing the unit at a high elevation be sure to fix the unit legs
(3m) or more away from the TV or radio (to prevent the screen from being distorted or noise from being generated)
Install the unit horizontally
Place where drained water does not become any problem.
Place with no plants (especially climbing plants) and where small animal can not access.
- Where there is machine oil
- Where sulfide gas exists
Outdoor
Unit
Outer wall
Indoor
Unit
Cut insulation to
have rainwater
drained
Make an U-trap(A) on the
pipe (which is connected
to the indoor unit) at outer
wall and cut the bottom
part of the insulation (about
10 mm) to prevent rainwater
from getting inside through
the insulation. However,
be careful not to damage
the pipe.
The appearance of the unit may be different from the diagram depending on the model.
AR5000&A3050 CV HP_IB&IM_DB68-04937A_EN.indd 36
(2.4m) or directly under eaves for accessibility for service and OH&S reasons.
- Salty environment such as seaside areas
- Other special atmosphere areas
4.9inch(125mm)
A
Wrap the refrigerant
pipes and the
drain hose with the
absorbent pad and
vinyl tape. Refer to page
54 for further details.
One round loop will help reduce noise and vibration.
English-36
3.9inch(100mm) or more
or more
You can select the direction of
draining (left or right).
and 9.84ft(3m) as minimum pipe
length. (It will reduce noise and
vibration)
length
Model
09/12 49.2ft(15m) 26.24ft(8m)
18/24 98.4ft(30m) 49.2ft(15m)
4.9inch(125mm)
or more
maximum
total pipe
height
L H
2015/1/4 11:48:09