Power wiring diagram
1 phase 2 wires 208~230 V (AM✴✴✴KXWD✴)
Outdoor unit
Outdoor unit
Connect a power cable of the outdoor unit after checking that L-N (1 phase 2 wires) is properly connected. (If the power
of 208 ~ 230 V is supplied to the N phase, PCB and other electrical parts will be damaged.)
Communication cable between indoor units has no polarity.
Arrange the cables with a cable tie.
❋ ELCB and ELB must be installed since there is risk of electric shock or fire when they are not installed.
1 phase 2 wires 208~230 V
MCCB + ELB
MCCB + ELB
or
or
ELCB
ELCB
Communication cable
1 phase 2 wires 208~230 V
MCCB + ELB
or
ELCB
Communication cable
ENGLISH-61
Indoor unit
Wired remote
controller
Indoor unit
MCCB + ELB
or
ELCB
EEV
Wired remote
Grounding
Grounding
controller