Connecting An Mhl-Enabled Device - Sharp LC-42LB261U User Manual

Connecting an MHL-enabled device

You can connect an MHL-enabled device, such as a cell phone, and view your device's screen on your TV.
On your TV
HDMI cable
connector
HDMI 2/MHL
jack
1 Connect the small connector on an MHL cable (not provided) to the micro USB port on the MHL-enabled device.
2 Connect the other end of the cable to the HDMI 2/MHL jack on the side of your TV.
3 Turn on the MHL-enabled device.
4 If your TV is turned on, press ENTER when a message appears. Your MHL-enabled device's menu opens.
OR
If your TV is turned off, turn on your TV. Press HOME. Your MHL-enabled device's menu opens.
Note
You must use the purple HDMI 2/MHL jack to connect an MHL-enabled
device.
Notes
You can also switch to MHL mode by:
• Pressing INPUT and selecting HDMI 2 (MHL)
• Pressing MENU and selecting MHL
For instructions on using your MHL-enabled device, see
MHL-enabled device" on page 45.
LC-42LB261U/LC-50LB261U Sharp 42"/50" LED TV
Side of TV
MHL cable
"Using an
MHL-enabled
device
25