Using The Remote Control; Installing Remote Control Batteries; Aiming The Remote Control - Sharp LC-42LB261U User Manual

Using the remote
control

Installing remote control batteries

1 While pressing the release latch on the back of the remote
control, lift the battery compartment cover off of the
remote control.
2 Insert two AAA batteries into the battery compartment.
Make sure that you match the + and – symbols on the
batteries with the + and – symbols in the battery
compartment.
3 Replace the battery compartment cover.
38
LC-42LB261U/LC-50LB261U Sharp 42"/50" LED TV
Cautions
• Batteries should not be exposed to
excessive heat, such as sunshine, heat
registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery
compartment with a cloth. If chemicals
touch your skin, wash immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is
depleted.
• If the remote control is not going to be
used for an extended period of time,
remove the batteries.

Aiming the remote control

• Point the remote control towards the remote sensor on
the front of your TV. For the location of the remote sensor,
see "Front" on page 10.