Connecting A Pc; Connecting A Usb Device - Sharp Aquos LC-60LE650X Operation Manual

Connecting external devices (Continued)
Connecting a DVD player/Digital TV STB (Set Top Box)
You can use the INPUT 1 (HDMI/ARC)/INPUT 2 (HDMI)/INPUT 3 (HDMI/MHL) or INPUT 4 terminals when connecting
to a DVD player/Digital TV STB (Set Top Box) and other audiovisual equipment.
When using HDMI-certified cable
(commercially available)
DVD player/
Digital TV STB
(Set Top Box)

Connecting a PC

You can use the INPUT 6 PC terminals when connecting
to a PC of ANALOGUE RGB terminal.
ANALOGUE RGB
ANALOGUE
PC

Connecting a USB device

Connect a USB device to the TV.
CAUTION
• Do not disconnect a USB device from the TV while
transferring files, when a screen is in "USB" mode.
NOTE
• The DIGITAL AUDIO OUTPUT terminal usually outputs the same audio from the speakers. (The audio of the content you are
viewing is output from the terminal.)
• The DIGITAL AUDIO OUTPUT terminal does not output some signals, depending on devices and software.
• The illustration used throughout this manual are based on LC-60LE650X.
When using component cable
(commercially available)
You can use the INPUT 2 (HDMI) terminal when
connecting to a PC of DIGITAL DVI terminal.
Using Digital Audio Output
It is possible to output audio through the DIGITAL AUDIO
OUTPUT terminal. PCM audio outputs from the terminal.
Optical fibre cable
(commercially available)
To optical digital input of
external audio devices
DVD player/
Digital TV STB
(Set Top Box)
DIGITAL DVI
PC
5