Display (Disp); Fixture Temperature (Temp); Fan Control (Fans) - Elation PowerWash 250 User Manual

Power Wash 250™
PAN
TILT
CYAN
MAGE
YELL
COLO
SHUT
DIMR
FOCU
SPEC
(DISP)
Display
DISP
Use this function to choose between different display indications. Use the
Up and Down buttons to toggle between the two different display modes.
Press Enter to confirm or Mode to cancel and return to the menu.
D ON
REV
3.10.5 Fixture Temperature
TEMP
This function allows you to read out the actual temperature of the fixture.
Press Enter to confirm or Mode to cancel. Inside temperatures below
80°C are not critical. Temperatures above 80°C will send the fixture into
protect mode and automatically switch the lamp off. Please note for a safe
operation the outside temperature should not exceed 45°C.
3.10.6 Fan Control
FANS
By using this function you can choose between 4 types of fan speed
©Elation Professionals® Los Angeles, Ca. 90058 -
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
Display On/Off (If you've chosen
in 15 seconds after the last input. The next key touch will
reactivate the display).
Turn around the display
(TEMP)
(FANS)
Pan Position
Tilt Position
Cyan color wheel
Magenta color wheel
Yellow color wheel
Color wheel (fixed colors)
Shutter / Strobe function
Dimmer
Focus
Lamp Off, Reset, ...
off
, the display will go out with-
www.ElationLighting.com
Page 22
-