Table of Contents
Advertisement
Power Wash 250™
Installation
2.1 Mounting
The POWER WASH 250™ is fully functional and operational, whether it hangs or
is standing on the floor. It can also be operated while standing on the floor. Be
sure this fixture is kept at least 0.5m away from any flammable materials
(decoration etc.). Install a safety cable that can hold at least 10 times the weight
of the fixture. Never use the carrying handles for secondary attachment.
2.1.1 Clamps
Secure two clamps to the bottom of the POWER WASH 250™ to mount
the fixture to truss. Refer to the printed instructions on the bottom of the
fixture for proper clamp installation.
2.1.2 Mounting plate
For a permanent installation of the POWER WASH 250™ in a non-truss
installation you can use the optional mounting plate (secured to the
©Elation Professionals® Los Angeles, Ca. 90058 -
Refer to regulations BGV C1 (former VBG 70) and DIN VDE 0711-
217 for proper installation in Europe
To ensure proper installation, only qualified staff should attempt
installation.
www.ElationLighting.com
Page 11
-
Advertisement
Table of Contents
