Loading Print Media In The Paper Tray; Using Manual Feed Mode - Dell Laser Printer 1110 Installation Manual

NOTE: If you print many pages, the surface of the output tray may become hot. Be careful not to touch the surface, and especially keep children away
from the surface.
NOTE: The output tray can hold up to 100 sheets of paper. Remove the pages so that the tray does not become overloaded.

Loading Print Media in the Paper Tray

Proper paper loading helps prevent paper jams and ensures trouble-free printing. Do not remove the paper in the tray while a job is printing. Doing so may
cause a paper jam. See "Types, Input Modes, and Capacities"
plain paper in the tray.
Open the paper input tray and load the paper in the paper tray with the side to be printed on facing up.
For details about loading paper in the tray, see
NOTE: If you experience problems with paper feed, place a sheet of paper in the tray using the manual feed mode.

Using Manual Feed Mode

If you select Manual Feed in the Source option in your software application, you can manually load a sheet of print material in the tray. Manually loading print
material can be helpful when you want to check the print quality after each page is printed. Use the manual feed mode to print transparencies, labels,
envelopes, or postcards.
NOTE: Always load only the print materials specified in
NOTE: Flatten any curl on postcards, envelopes, and labels before loading them into the tray.
To use the manual feed mode:
1. Load a sheet of print material in the paper tray with the side to be printed on facing up.
for acceptable paper size and capacity for the tray. You can load approximately 150 sheets of
"Loading Paper".
"Paper Specifications" to avoid paper jams and print quality problems.