Powered By Poe Over Cat.5 - KTI Networks KGC-352 Series Installation Manual

2.4 Powered by PoE over Cat.5

Power supply by a Mid-Span PoE Injector
The following figure illustrates the converter is powered by the PoE
delivered from a remote mid-span PoE injector over Cat.5.
Power supply by a PoE PSE Switched Port
The following figure illustrates the converter is powered by the PoE
delivered from a remote PoE PSE switch over Cat.5.
Note:
1. The Cat.5 used can be the standard Cat.5 cable for Ethernet connec-
tion.
2. Check the power LED on the converter to see whether the power is
received on the Cat.5.
3. For the compatibility, the remote PoE PSE used must be IEEE 802.3af
compliant.
-13-