Cleaning And Maintenance; Venting System; Pilot And Burner Flames; Cleaning Glass - Majestic 20iLDVNV Installation And Operating Instructions Manual

cLeANiNG and MAiNteNANce

Make sure the gas valve knob is in the "OFF" position. Wait
at least five (5) minutes before start-ing maintenance.

VeNtiNG SySteM

A qualified agency should examine the venting system
annually.

cLeANiNG GLASS

Clean the ceramic glass periodically. Condensation will
sometimes form on the glass during a cold startup. This is
normal for all gas fireplaces and inserts. This condensation
often attracts dust and lint to the surface of the glass. The
initial paint curing of the appliance can also leave a slight
film on the glass. This is a temporary problem.
You should clean the glass after the first two weeks of use.
After that, you should clean the glass no more than two or
three times a season. Use a mild glass cleaner to clean
the door. Do not use abrasive cleaners. They will damage
the glass surface.
83D0524

PiLOt AND BuRNeR FLAMeS

Visually check pilot and burner flames periodically. Refer
to Figure 31 for typical burner flame. Refer to Figure 32
for typical pilot flame.
Figure 31 -
Typical Burner Flame
LG535
ILDV log flame
9/08
Thermocouple
Figure 32 -
Typical Pilot Flame
20/30/40ILDV Fireplace Insert
LG535
Thermopile
FP1943
FP1943
pilot flame
29