Right Side Shroud For Heart Rate Units - Life Fitness 9500 Series Service Manual

Life Fitness Model 9500HR Cross-Trainer
How To...Replace Right Side Shroud For Heart Rate Units
Tools Required: Torx key, or Standard flat screwdriver, Socket Set, Hex Key Set
1. Turn power OFF at the On/Off switch and unplug line
cord from electrical outlet.
2. Remove HOOD SHROUD ASSEMBLY. See How To...
3. Remove RIGHT HEART RATE HANDLEBAR WITH
ELECTRODES. See How To...
4. Carefully unwrap the INSULATED WIRE CLAMP away
from the HEART RATE CABLE CONNECTOR, using a
Phillips screwdriver remove the upper SCREW (1), and
INSULATED WIRE CLAMP(1) securing the HEART
RATE CABLE BRACKET to INNER SHROUD CAP.
5. Remove the upper SCREW (1) and loosen (do not
remove) the lower SCREW (1) securing the HEART
RATE CABLE CLAMP to the HEART RATE CABLE
BRACKET.
Inner Shroud
Cap Screw
10. Using a (T20) torx screwdriver remove SCREWS (4) securing the RIGHT SIDE SHROUD ASSEMBLY to the
FRONT PANEL SHROUD, and SCREWS (2) securing the lower RIGHT SHROUD ASSEMBLY to the FRAME.
Separate the DUAL-LOCK securing the FRONT PANEL SHROUD to the SIDE SHROUD ASSEMBLY.
11. Carefully maneuver RIGHT SIDE SHROUD ASSEMBLY from between the HANDRAIL MOUNTING
BRACKET and the HANDRAIL MOUNTING PLATE, then maneuver the SIDE SHROUD off and away from the
SHAFT HUB ASSEMBLY, set aside.
12. Reverse steps 1 - 12 to replace all parts to proper position.
Heart Rate
Cable
6. Carefully place the HEART RATE CABLE, through the cut out
Heart Rate
area of the INNER SHROUD CAP and RIGHT SIDE SHROUD
Cable Clamp
ASSEMBLY.
Screw
7. Remove the lower SCREW (1) securing both the HEART RATE
CABLE BRACKET ASSEMBLY and the INNER SHROUD CAP, to
Heart Rate
Cable Clamp the SHAFT HUB FRAME ASSEMBLY. Set aside.
8. Using a (3/16") Hex Key remove (2) BOLTS securing the user's
Heart Rate
right HANDRAIL MOUNTING PLATE to the HANDRAIL MOUNTING
Cable Bracket
BRACKET.
9. Using wrench (1/2") loosen BOLTS (2) and NUTS (2) securing
the user's right side HANDRAIL ASSEMBLY to the HANDRAIL
MOUNTING POST.
Handrail
Mounting
Post
Front
Panel
Shroud
Handrail
Mounting
Bracket
Handrail
Mounting
Plate
9