State 6: Telemetry Enable/Disable - Life Fitness 9500 Series Service Manual

Life Fitness Model 9500 Series Cross-Trainers
DIAGNOSTIC STATE 6 - TELEMETRY ENABLE/DISABLE
TELEM E T R Y O N
TELEMETRY can be turned ON or OFF. The telemetry default is set to ON. When in the default mode the
START/ENTER key LED will illuminate. This setting is stored in EEROM even when the unit is not in use. The
heart-shaped LEDs illuminate in the program profile window.
Toggle between ON and OFF by pressing the number 5 key or the arrows keys (DOWN ARROW for OFF and UP
ARROW for ON).
Press the START/ENTER key to scroll forward to the next Diagnostic State or press the CLEAR/PAUSE key to
scroll backward to previous programs.
To test for proper operation, place a pulse simulator 2 - 3 feet from the RECEIVER located in the TRAY
ASSEMBLY. The Heartrate will display in the Heartrate section of the display.
To exit diagnostics, press the CLEAR/PAUSE key when in Diagnostic State 1 to get back to the user display.
Proceed to Diagnostic State 7 by pressing the START/ENTER key.
10