Programming
Use the ∧ ∧ ∧ ∧ ∧ or ∨ ∨ ∨ ∨ ∨ key to select the
p r e g r i n d i n g
activate it with the MENU/OK key. The
p r e g r i n d i n g
words
o n
p r e g r i n d i n g
o f f
display. Use the ∧ ∧ ∧ ∧ ∧ or ∨ ∨ ∨ ∨ ∨ key to select the
setting desired and memorize it with the
MENU/OK key.
TOTAL COFFEES
This function allows you to count how many
coffees the machine has already made.
Press the MENU/OK key. Use the ∧ ∧ ∧ ∧ ∧
or ∨ ∨ ∨ ∨ ∨ key to select the
function and then activate it with the
MENU/OK key. The total number of
coffees will be displayed, e.g.
t o t a l
c o f f e e
8 6
DESCALING
This function allows you to descale the
machine using the integrated program.
Once the amount of water set for the
degree of hardness is reached, the
d e s c a l i n g
message
the display. The machine should be
descaled no later than at this time.
Press the MENU/OK key. Use the ∧ ∧ ∧ ∧ ∧
or ∨ ∨ ∨ ∨ ∨ key to select the
function and then activate it with the
MENU/OK
d e s c a l i n g
function and then
or
will appear on the
t o t a l
c o f f e e
will appear on
d e s c a l i n g
key.
The
word
will be displayed.
Important: before starting the
descaling cycle, carefully read
the directions on Descaling par.9.
Never descale the dispensing unit. That
is to say, never press the coffee-making
buttons (18, 19 or 20), whenever there
is a descaling agent in the water
container. You may cause damage to
the dispensing unit.
DESCALING INDICATOR
The machine indicates after how many
litres of water (remaining quantity) it will
need descaling.
Press the MENU/OK key. Use the ∧ ∧ ∧ ∧ ∧
or ∨ ∨ ∨ ∨ ∨ key to select the
function and activate it with the MENU/
OK key. Two messages will be displayed
q u a n t i t y
in turn:
n o t
r e a c h e d
l e f t
q u a n t i t y
example,
l
Again press the MENU/OK key. The
r e s e t
message
y e s
displayed. By pressing the MENU/OK
key again, you will clear the meter.
E
Note: if you do not wish to clear
the meter, press ESC.
E
Important: it is recommended to
clear the scale meter each time
after descaling so that you will not
forget to descale the machine.
TIMER
It is possible to program the machine to
switch over automatically from the
r e a d y
f o r
u s e
37
s i g n a l
d e s c a l
w a t e r
and, for
.
1 3 0
d e s c a l i n g
will be
function
to
the