Table of Contents
Advertisement
Installation
4
INSTALLATION
For your own safety and the safety of
others, you must strictly comply with
the “Safety Rules” described in chap.3
4.1
Package
The original packaging was designed and
made to protect the machine during
shipping. We recommend keeping it for
future transport purposes.
4.2
Preliminary oprations
• Remove the packet containing the lid,
the wrench for the dispensing unit and
the cleaning brush from the packing
materials.
• Take the coffee machine out of its
packing and position it in a suitable
place conforming to the requisites
described in the safety rules (chap.3.)
• Fit the coffee container lid (10) onto the
coffee container (9); store the dispensing
unit wrench and cleaning brush in safe
place.
• Make sure that the tray (2) with grating,
the dregs box (1) and the dispensing unit
(14) are correctly fitted and that the front
door (13) is closed.
• Before plugging in the machine, make
sure the button (16) is on OFF .
4.3
Turning on for the first time
28
•
Lift out the water container (7) and
remove the lid (8). Rinse it out and fill it
with fresh drinking water, making sure
you do overfill it. Lower the container
back into place inside the machine and
replace the lid.
Fill the container (7) only with
cool, still water. Hot water or
other liquids may damage the
container and/or the machine.
Always make sure there is enough
water inside the container before
starting the machine.
27
•
Take off the lid (10) and fill the
container with coffee beans (9).
• Fit the lid of the coffee container back
into place.
Fill the container (9) with
coffee beans only. Ground or
freeze-dried coffee or any other objects
will damage the machine.
• Insert the plug (15) into a suitable outlet.
• The button (16) is positioned on OFF .
Simply press the button (16) to turn on
the machine.
• Press the button (6); the machine will start
heating
up.
r i n s i n g
w a r m i n g
u p
display. It will take the machine about 2
minutes to heat up. As soon as it reaches
the right temperature it will perform a
cleaning cycle. At the end of the cycle
the message
s e l e c t
r e a d y
appear on the display.
4.4
Loading the circuit
30
•
Position the steam tube (5) over the
drip tray.
• Turn the knob (6) counterclockwise
and wait until water flows out smoothly
from the steam tube; to cut off flow,
turn the knob (6) clockwise.
E
Note: Before starting up for the
first time, if the machine has
been inoperative for a lengthy period
or the water container has been
completely emptied, it is advisable
to load the circuit. The circuit should
also be loaded whenever the
v e n t i l a t e
message
29
The
message
will appear on the
will
p r o d u c t
f o r
u s e
appears on
Hide quick links:
Advertisement
Table of Contents
