Philips Saeco Vienna Digital SUP 018D Operating Instructions Manual page 18

36
appear. Use the ∧ ∧ ∧ ∧ ∧ or ∨ ∨ ∨ ∨ ∨ key to select the
language desired and memorize it with the
“MENU/OK” key.
WATER HARDNESS
Tap water may be harder or softer
depending on the region. For this reason,
the machine may be adjusted according
to the hardness of the tap water in the place
where it is to be used; the degree of
hardness is expressed on a scale of 1 to 4.
The machine is already programmed on
an average value (hardness 3). The
hardness of the water in the machine
should be adjusted according to the
amount of lime and the degree of water
hardness. Briefly dip (1 second) the strip
provided in water and gently shake it. After
a minute the test result is visible on the
strip.
• Press the “MENU/OK” key. Use the ∧ ∧ ∧ ∧ ∧
or ∨ ∨ ∨ ∨ ∨ key to select the
function and then activate it with the
“MENU/OK” key.
• The display will show
“Hardness 2”, “Hardness 3” or “Hardness
4”.
• Select the correct water hardness with
the ∧ ∧ ∧ ∧ ∧ or ∨ ∨ ∨ ∨ ∨ key and memorize it with the
“MENU/OK” key.
E
Important: descale the machine
when it has reached the amount
of water set for the degree of
hardness. The word
will appear on the display.
TEMPERATURE
To obtain hotter or less hot coffee, adjust
the water temperature (Minimum, low,
w a t e r h a r d n
w a t e r h a r d n
,
h a r d n e s s 1
d e c a l c i f y
medium, high and maximum).
• First use the ∧ ∧ ∧ ∧ ∧ or ∨ ∨ ∨ ∨ ∨ key to select the
t e m p e r a t u r e
activate it with the “MENU/OK” key. An
indication of the temperature will appear,
t e m p e r a t u r e
e.g.
m e d i u m
• Press the “MENU/OK” key. Use the ∧ ∧ ∧ ∧ ∧
or ∨ ∨ ∨ ∨ ∨ key to select the temperature desired
and memorize it with the “MENU/OK”
key.
PRE-BREWING
With the pre-brewing process, the coffee
is slightly moistened before actual brewing.
This brings out the full flavour of the coffee,
lending it an excellent taste.
• Press the “MENU/OK” key. Use the ∧ ∧ ∧ ∧ ∧
or ∨ ∨ ∨ ∨ ∨ key to select the
function and then activate it with the
“MENU/OK”
p r e b r e w i n g
o n
p r e g r i n d i n g
o f f
display.
• Use the ∧ ∧ ∧ ∧ ∧ or ∨ ∨ ∨ ∨ ∨ key to select the setting
desired and memorize it with the
“MENU/OK” key.
PRE-GRINDING
With the pre-grinding process, the machine
grinds twice: the first time for the type of
coffee selected, the second time for the
subsequent coffee (not yet selected). This
function is useful only if you have to make
different types of coffee at the same time
(e.g. during a visit or a party).
• Press the “MENU/OK” key.
Programming
function and then
.
p r e b r e w i n g
key. The words
p r e b r e w i n g
,
l o n g
will appear on the
or