No
Parts
2
Fan
1)
Moter
2)
3)
3
Heat Exchanger
1)
2)
Compressor
3)
4)
5)
6)
3-30
Procedure
Loosen the fixing nut and detach the
Fan.
(Use Monkey Spanner.)
Loosen 4 fixing bolts and detach the
Motor. (Use +Screw Driver.)
Loosen 4 fixing bolts and detach the
Bracket Motor. (Use +Screw Driver.)
Release the refrigerant at first.
Disassemble the Inlet and Outlet Pipe
by welding.
Loosen the fixing screw of the Heat
Exchanger. (Use +Screw Driver.)
Detach the Heat Exchanger.
Loosen 3 nuts of the Compressor. (Use
Monkey Spanner.)
Detach the Compressor.
Remark
Samsung Electronics