No
Parts
7
Fan
1) Turn the hexangular nut attached to the
Motor
2) Turn the three hexangular nuts on the
8
Evaporator
1) Remove the screws of the Steel Holder Evaps
2) Remove the 2 fixing screws of the Partition
3-26
Procedure
top of the Fan counterclockwise to remove it.
Take the Fan out of the Motor.
Motor counterclockwise to remove the nuts.
Take the Motor Wires attached to these three
locations out with your hands prior to remov-
ing the Motor.
that are used to fix the Heat Exchanger, and
then remove it. (Use +Screw Driver)
Evap at the Heat Exchanger's In/Out Pipe.
(Use +Screw Driver)
Remark
Samsung Electronics