Samsung AJ009JNNDCH Service Manual page 30

No Parts
3 Evaporator
3-14
Procedure
The Evaporator should be disassembled
after disassembling the Cover Control
1-3) and the Drain Pan 2-1), 2-2), 2-3).
1) Disassemble the Cover Pipe that fixes
the high/low pressure Pipe.
- Unscrew 3 screws
2) Disassemble the refrigerant temperature
sensor, Inlet air temperature sensor.
3) Disassemble the Support Evap. LF that
fixes the Evaporator.
- Unscrew 2 screws
4) Disassemble the Support Evap RH.
- Unscrew 2 screws
Remark
Samsung Electronics