Placing Originals In The Adf; Placing Regular Size Originals - Ricoh Aficio 1515 Operating Instructions Manual

Placing Originals

Placing Originals in the ADF

Note
1
❒ Do not stack originals over the lim-
it mark on the side fence of the
ADF.
❒ The last page should be on the bot-
tom.
❒ Do not place anything on the ADF
cover, doing so could cause a mal-
function.
A A A A
Set the document guide to the
original size.
B B B B
Align the edges of the originals
and place them in the ADF with
the side to be copied facing up.
1.
Limit mark
2.
Document guide
16
Note
❒ Straighten curls in the originals
before placing them in the ADF.
❒ To prevent multiple sheets feed-
ing in at once, fan the originals
before placing them in the ADF.
❒ Set the original squarely.

Placing Regular Size Originals

Note
❒ If you do not specify the original
size, the machine will make copies
on the paper size in the tray select-
ed. When copy paper size and
original size differ, you need to
specify the original size as follows:
A A A A
Place originals face down on the
exposure glass, or face up into the
ADF.
B B B B
Select the paper tray or bypass
tray using { { { { U U U U } } } } or { { { { T T T T } } } } , and then
press the { { { { #} } } } key.
C C C C
Select [Regular Size] using { { { { U U U U } } } } or
{ { { { T T T T } } } } , and then press the { { { { OK} } } } key.
ABU026S
Note
❒ If you selected the bypass tray,
first select [Original Size] using
{ { { { U U U U } } } } or { { { { T T T T } } } } , and then press the
{ { { { OK} } } } key.