Replacement Bulbs
Exterior Lamp
Cornering Lamps
Front Turn Signal
Headlamps
Lower High-Beam
Upper Low-Beam
For replacement bulbs not listed here, contact your
dealer.
Windshield Wiper Blade
Replacement
Windshield wiper blades should be inspected for wear
and cracking. See Scheduled Maintenance on page 6-4
for more information on wiper blade inspection.
It is a good idea to clean or replace the wiper blade
assembly on a regular basis or when worn. For proper
windshield wiper blade length and type, see Normal
Maintenance Replacement Parts on page 6-13.
5-56
To replace the wiper blade assembly, do the following:
1. Turn the ignition to ACCESSORY and turn the
Bulb Number
3157
3157
9005
9006
2. Tip the blade up almost to a T position and push
3. To install, align the wiper blade with the loop on the
wipers on. Position the wipers on the windshield
in the mid-wipe position. Then with a door
open, turn the ignition to OFF.
down on the tab to release the wiper blade
assembly.
wiper blade assembly, and push up to snap it
into place.