Page 2 Cadillac Seville Owner Manual 2003 Seats and Restraint Systems Front Seats Safety Belts Child Restraints Supplemental Inflatable Restraint (SIR) Restraint System Check Features and Controls Keys Doors and Locks Windows Theft-Deterrent Systems Starting and Operating Your Vehicle Mirrors Onstar@ HomeLink@ Transmitter...
Page 3 GENERAL MOTORS, GM, the GM Emblem, CADILLAC, the CADILLAC Crest & Wreath and the name SEVILLE are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice.
Page 4 Safety Warnings and Symbols You will find a number of safety cautions in this book. We use a box and the word CAUTION to tell you about things that could hurt you if you were to ignore the warning. These mean there is something that could hurt you or other people.
Page 5 Vehicle Damage Warnings Also, in this book you will find these notices: Notice: These mean there is something that could damage your vehicle. A notice will tell you about something that can damage your vehicle. Many times, this damage would not be covered by your warranty, and it could be costly.
Page 6 These are some examples vehicle symbols you may find on your vehicle: LATCH BOTH LAP AND CAUTION SHOULDER BELTS TO POSSIBLE PROTECT OCCUPANT INJURY NOT TWIST SAFETY BELT WHEN AlTACHlNG PROTECT EYES BY FASTEN SHIELDING SEAT BELTS \$!! CAUSTIC & MOVE SEAT BAlTERY FULLY...
Page 8: Seats And Restraint Systems
Section 1 Front Seats ... Power Seats Power Lumbar ... Heated Seats ... Reclining Seatbacks Head Restraints ... Safety Belts Safety Belts: They Are for Everyone Questions and Answers About How to Wear Safety Belts Properly Driver Position ... Safety Belt Use During Pregnancy ... 1-18 Right Front Passenger Position ...
Page 9: Front Seats
Front Seats Power Seats The power seat controls are located on the outboard sides of the front seat cushions. Move the front of the seat control up or down to adjust the front portion of the cushion. Move the rear of the seat control up or down to adjust the rear portion of the cushion.
Page 10 The heated seats can only be used when the ignition is rurnea on. Tne nearing eiemenrs in rne seais automatically turn off when the vehicle's ignition is turned off. Only the outboard rear seat positions have heating elements. Reclining Seatbacks See Head Restraints pape 1-5.
Page 11 Don’t have a seatback reclined if your vehicle is moving. 1 -4 Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can’t do their job when you’re reclined like this. The shoulder belt can’t do its job.
Page 12 Adjust your head restraint so that the top of the restraint is closest to the top of your head. This position reduces the chance of a neck injury in a crash. The switches used to adjust the front head restraints are located on the outboard side of each front seat.
Page 13: Safety Belts
Safety Belts Safety Belts: They Are for Everyone This part of the manual tells you how to use safety some belts properly. It also tells you not do with safntnf belts. L d t let ar,+ne rib= where he or she can’t wear a safety belt properly.
Page 14 Your vehicle has that comes on as a reminder to buckle Safety Belt Reminder Light on page matter a lot! Why Safety Belts Work a fight See When you ride in or on anything, you go as fast as it goes. 3-38.
Page 15 Put someone on it. Get it up to speed. Then stop the vehicle. The rider doesn’t stop. 1 -8...
Page 17 or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That’s why safety belts make such good sense. 1-10 Questions and Answers About Safety Belts...
Page 18 i’m a good driver, and i never drive far from home, why should I wear safety belts? You may be an excellent driver, but if you’re in an accident even one that isn’t your fault your passengers can be hurt. Being a good driver doesn’t protect you from things beyond your control, such as bad drivers.
Page 19 Lap-Shoulder Belt The driver has a lap-shoulder belt. Here’s how to wear it properly. 1. Close and lock the door. 2. Adjust the seat so you can sit up straight. To see how, see “Seats” in the Index. 1-12 3. Pick up the latch plate and pull the belt across you. Don’t let it get twisted.
Page 20 T I L ne iap pari of the beit snouia be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you'd be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen.
Page 21 What’s wrong with this? The shoulder belt is too loose. It won’t give nearly as much protection this way. 1-14 You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body.
Page 22 What’s wrong with this? You can be seriously injured buckled in the wrong place like this. In the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones. This could cause serious internal injuries.
Page 23 What’s wrong with this? The shoulder belt is worn under the arm. It should be worn over the shoulder at all times. 1-16 le ser shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury.
Page 25 To unlatch the belt, just push the button on the buckle. The belt should go back out of the way. Before you close the door, be sure the belt is out way. If you slam the door on it, you can damage both the belt and your vehicle.
Page 26 The best way to protect, fetus is to protect the mother. When a safety belt is worn properly, it’s more likely that the fetus won’t be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly.
Page 27 Lap-§boulder Belt All rear seating positions have lap-shoulder belts. Here’s how to wear one properly. 1. Pick up the latch plate and pull the belt across you. Don’t let it get twisted. The shoulder belt may lock if you pull the belt across you very quickly.
Page 28 3. To make the lap part tight, pull down on the buckle The lap part of the belt should be worn low and snug on end of the belt as you pull up on the shoulder part. the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones.
Page 29 The safety belt locks if there's a sudden stop or a crash, or if you pull the belt very qu'-'-lv out of the retractor. u can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury.
Page 30 €2-...
Page 31: Child Restraints
Child Restraints Older Children Older children who have outgrown booster seats should wear the vehicle’s safety belts. 1-24 What is the proper way to wear safety belts? If possible, an older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide.
Page 32 Never do this. Here two children are wearing the same belt. The belt can’t properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured. A be!t must be used by only one person at a time. .
Page 33 Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. If the child wears the belt in CAUTION: (Continued) 1-26 this way, in a crash the child might slide under the belt.
Page 34 People should never hold a baby in their arms while riding in a vehicle. A baby doesn’t weigh much until a crash. During a crash a baby will become so heavy it is not possible to hold CAUTION: (Continued) For example, (40 km/h), a 12-lb.
Page 35 Children who are up against, or very close to, any air bag when it inflates can be seriously injured or killed. Air bags plus lap-shoulder belts offer outstanding protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its air bag system is designed for them.
Page 36 Newbc inl-.. .ts need complete support, including support for the head and neck. This necessary because a newborn infant’s neck is weak and its head weighs so much compared with the rest of its body. In a crash, an infant in a rear-facing seat settles into the restraint, crash forces can be distributed across the strongest part of an infant’s body, the back and...
Page 37 1-30...
Page 38 A forward-facing child seat (C-E) provides restraint for the child’s body with the harness and also sometimes with surfaces such as T-shaped or shelf-like shields. A booster seat (F-G) is a child restraint designed to improve the fit of the vehicle’s safety belt system. Some booster seats have a shoulder belt positioner, and hiyh-b~&...
Page 39 How do child restraints work? A child restraint system is any device designed for use in a motor vehicle to restrain, seat, or position children. A built-in child restraint system is a permanent part of the motor vehicle. An add-on child restraint system is a portable one, which is purchased by the vehicle’s owner.
Page 40 Accident statistics show that children are safer if they are restrained in the rear rather than the front seat. General Motors, therefore, recommends that child restraints be secured in a rear seat, including an infant riding in a rear-facing infant seat, a child riding in a forward-facing child seat and an older child riding in a Never booster seat.
Page 41 In Canada, the law requires that forward-facing child restraints have a top strap, and that the strap be anchored. In the United States, some child restraints also have a top strap. If your child restraint has a top strap, it should be anchored. 1-34 Anchor the top strap to one of the following anchor points.
Page 43 To assist you in locating the lower anchors for this child restraint system, each seating position with the LATCH system will have the LATCH system symbol on the seatback directly above the anchors. In order to use the system, you need either a forward-facing child restraint that has attaching points (B) at its base and a top tether anchor (C), a rear-facing child restraint that has attaching...
Page 44 A. Vehicle anchor B. LATCH system attachment points Use the LATCH system instead of the vehicle’s safety belts to secure a child restraint. If a -AT( pe ch restrain its anchorage points, the restraint won’t be able to protect a child sitting there. In a crash, the child could be seriously injured or killed.
Page 45 Securing a Child Restraint Designed for the LATCH System 1. Find the anchors for the seating position you want to use, where the bottom of the seatback meets the back of the seat cushion. 2. Put the child restraint on the seat. 3.
Page 46 Tilt the latch plate to adjust the belt if needed. 3. Buckle the belt. Make sure the release button positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 1-39...
Page 47 4. To tighten the belt, pull up on the shoulder belt while you push down on the child restraint. If you’re using a forward-facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt. 5.
Page 48 the back of the rear-fa_---a child restraint would be very close to the inflating air bag. Always secure a rear-facing child restraint in a rear seat. Although a rear seat is a safer place, you can secure a forward-facing child restraint in the right front seat. You'll be using the lap-shoulder belt.
Page 49 5. Pull the rest of the lap belt all the way out of the retractor to set the lock. 1-42 6. To tighten the belt, feed the lap belt back into the retractor while you push down on the child restraint. You may find it helpful to use your knee to push down on the child restraint as you tighten the belt.
Page 50: Supplemental Inflatable Restraint (Sir)
This part explains the frontal and side impact Supplemental Inflatable Restraint (SIR) systems or air bag systems. Your vehicle has four air bags a frontal air bag for the driver, another frontal air bag for the right front passenger, a side impact air bag for the driver, and another side impact air bag for the right front passenger.
Page 51 Both frontal and side impact air bags inflate with great force, faster than the blink If you’re too close to an inflating air would be if you were leaning forward, seriously injure you. Safety belts help keep you in position for air bag inflation before and during a crash.
Page 53 The right front passenger's frontal air bag is in the The driver's side impact air bag is in the side of the instrument panel on the passenger's side. driver's seatback closest to the door. 1-46...
Page 54 The right front passenger’s side impact air bag is in the side of the passenger’s seatback closest to the door. If something is between an occupant and an air bag, the bag might not inflate properly ~r it might force the object into that person causing severe injury or even death.
Page 55 If your vehicle strikes something that will move or deform, such as a parked car, the threshold level will be higher. The driver’s and right front passenger’s frontal air bags are not designed to inflate in rollovers, rear impacts, or in many side impacts because inflation would not help the occupant.
Page 56 Air bags shou!d never be regarded as anything more than a supplement to safety belts, and then only in moderate to severe frontal or near-frontal collisions for the driver’s and right front passenger’s frontal air bags, and only in moderate to severe side collisions for the driver’s and right front passenger’s side impact air bag.
Page 57 In many crashes severe enough to inflate an air bag, windshields are broken by vehicle deformation. Additional windshield breakage may also occur from the right front passenger air bag. Air bags are designed to inflate only once. After an air bag inflates, you’ll need some new parts for your air bag system.
Page 58 Air bags affect how your vehicle should be serviced. There are parts of the air bag systems in several places around your vehicle. Your dealer and the service manual have information about servicing your vehicle and the air bag systems. To purchase a service manual, see Service Publications Ordering Information on page 7-9.
Page 59: Restraint System Check
Restraint System Check Checking Your Restraint Systems Now and then, make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have repaired.
Page 60 If you’ve had a crash, do you need new belts or LATCH system parts? After a very minor collision, nothing may be necessary. But if the belts were stretched, as they would be if worn during a more severe crash, the you need new parts.
Page 62: Table Of Contents
Section 2 Keys Remote Keyless Entry System Remote Keyless Entry System Operation Doors and hocks Door Locks Central Door Unlocking System Power Door Locks Programmable Automatic Door Locks Rear Door Security Locks ... Lockout Protection Leaving Your Vehicle ... Trunk ... Windows ...
Page 63 Section 2 Storage Areas ... Glove Cellular Telephone ... Center Console Storage Area ... Map Pocket ... Assist Handles ... Garment Hooks Features and Controls 2.46 Umbrella Holder ... 2-46 Floor Mats ... 2-46 Convenience Net ... 2-46 Sunroof ... 2-46 Vehicle Personalization ...
Page 64: Keys
in a Leaving children vehicle with the ignition key is dangerous for many reasons. A child or others could be badly injured or even killed. They could operate the power windows other controls or even make the vehicle move. If they turned the ignition to ACC or ON and (P), moved the shift lever out of PARK that...
Page 65: Remote Keyless Entry System
You may even have to damage your vehicle to get in. So be sure you have spare keys. In an emergency, contact Cadillac Roadside Assistance. See Roadside Service If your vehicle is equipped with the Onstar@ system with...
Page 66: Remote Keyless Entry System Operation
This device complies with RSS-310 of Industry Canada Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference received, including interference that may cause undesired operation of the device. Changes or modifications to this system by other than an authorized service facility could void authorization to use this equipment.
Page 67 (Unlock): Press this button to unlock the driver’s door. The parking lamps on your vehicle will flash twice. The parking lamps will not flash if they have been turned on manually. Remote confirmation is not operational if a door open. Press this button again within one to five seconds to unlock the other doors.
Page 68 Notice: When replacing the battery, use care touch any of the circuitry. Static from your body transferred to these surfaces may damage the transmitter. 1. Use an object like a coin to pry open the transmitter. 2. Once ine transmitter is separated, use an ObJeCt like a pencil to remove the old battery.
Page 69: Doors And Locks
Doors and Locks Door Locks Unlocked doors can be dangerous. Passengers especially children easily open the doors and fall out of a moving vehicle. When a door is locked, the handle won’t open it. You increase the chance of being thrown out of the vehicle in a crash if the doors aren’t locked.
Page 70: Central Door Unlocking System
Central Door Unlocking System Your vehicie has a centrai door unlocking mode and a theft-deterrent system. When unlocking the driver’s door, you can unlock the other doors by holding the key in the turned position for a few seconds or by quickly turning the door twice in the lock...
Page 71: Rear Door Security Locks
Rear Door Security Locks Your vehicle is equipped with rear door security locks that prevent passengers from opening the rear doors on your vehicle from the inside. The rear door security locks are located on the inside edge of each rear door.
Page 72: Trunk
Trunk It can be dangerous to drive with the trunk open because carbon monoxide (CO) gas can come into your vehicle. You can’t see or smell CO. It can cause unconsciousness and even death. If you must drive with the trunk lid open or if electrical wiring or other cable connections must pass through the seal between the body and the trunk lid:...
Page 73 Trunk Lid Tie Down Driving with the trunk lid open can allow dangerous CO (carbon monoxide) gas to come into your vehicle. You can’t see or smell CO. can cause unconsciousness and even death. If you ever need to drive with your trunk lid open, then: Make sure all windows, the rear seat pass-through and sunroof are closed.
Page 74 Notice: The emergency trunk release handle is not designed to be used to tie down the trunk lid or as an anchor point when securing items in the trunk. There is a glow-in-the-dark trunk release handle located inside the trunk on the latch. This handle will glow following exposure to light.
Page 75: Windows
Leaving children in a vehicle with the windows closed is dangerous. A child can be overcome by the extreme heat and can suffer permanent injuries or even death from heat stroke. Never leave a child alone in a vehicle, especially with the windows closed in warm or hot weather.
Page 76 The power window switches are located on the armrest near each window. Press the up or down the switches to raise or lower the windows. Your vehicle has Retained Accessory Power (RAP) that allows you to use the power windows once the ignition has been turned off.
Page 77 Programming the Power Windows If the battery on your vehicle has been recharged, disconnected or is not working, you will need to reprogram each front power window for the express-up feature to work. Before reprogramming, you will need to replace or recharge your vehicle’s battery. To program each front window, follow these steps: 1.
Page 78 The rear window lockout button is located on the driver’s door armrest next to the window switches. Press this button to disable the rear window controls. The light on the button will illuminate, indicating that the feature is in use. The rear windows still can be raised or lowered using the driver’s window switches when the lockout feature is active.
Page 79 Theft-Deterrent Systems Vehicle theft is a big business, especially in some cities. Although your vehicle has a number of theft-deterrent features, we know that nothing we put on it can make it impossible to steal. The SECURITY light is located on the instrument panel cluster.
Page 80 Testing the A!arm From inside the uehieie, roii down the window, then get out of the vehicle, keeping the door open. From outside of the vehicle, with the door open, lock the vehicle using the power door lock or the remote keyless entry transmitter and close the door.
Page 81: Pass-Key@ Ill
PASS-Key@ 111 Your PASS-Key@ Ill system operates on a radio frequency subject to Federal Communications Commission (FCC) Rules and with Industry Canada. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired...
Page 82 Your vehicle is not protected by the PASS-Key@lll system at this time. If you lose or damage a PASS-Key@ Ill key, your dealer to have a new key made. In an emergency, contact Cadillac Roadside Assistance. C a n Rnqr(r;dn Cnnfinn v v v l "...
Page 83: Starting And Operating Your Vehicle
Starting and Operating Your Vehicle New Vehicle Break-In Notice: Your vehicle doesn’t need an elaborate “break-in.” But it will perform better in the long run if you follow these guidelines: Don’t drive at any one speed slow for the first 500 miles (805 km). Don’t make full-throttle starts.
Page 84: Starting Your Engine
ACC (Accessory): This pnsitior! !ets you use things like the radio, windshield wipers, power windows and optional sunroof when the engine is off. Use ACC if you must have your vehicle in motion while the engine is off (for example, if your,vehicle is being pushed or towed).
Page 85: Engine Coolant Heater
Notice: Holding your key in START for longer than 15 seconds at a time will cause your battery to be drained much sooner. And the excessive heat can damage your starter motor. Wait about 15 seconds between each try to help avoid draining your battery or damaging your starter.
Page 87: Automatic Transaxle Operation
Automatic Transaxle Operation There are several different positions for the shift lever. PARK (P): This position locks the front wheels. It’s the best position to use when you start the engine because your vehicle can’t move easily. It is dangerou, .o get out c. ,,~r vehicle if the shift lever is not fully in PARK (P) with the parking brake firmly set.
Page 88 REVERSE (R): Use this gear to backup. Notice: Shifting to REVERSE (Rj while your vehicle moving forward could damage your transaxle. Shift to REVERSE (R) only after your vehicle is stopped. Also use this gear to rock your vehicle back and forth to get out of snow, ice or sand without damaging your transaxle.
Page 89 SECOND (2): This position gives you more power. You can use SECOND (2) on hills. It can help control your speed as you go down steep mountain roads, but then you would also want to use your brakes off and on. Notice: Don’t shift into SECOND (2) unless you are going slower than 65 mph (105 km/h), or you can damage your engine.
Page 90 The parking brake located to the left of the regular brake pedal, near the driver’s door. To set the parking brake, hold the regular brake pedal down with your right foot and push the parking brake pedal down with your left foot. If the ignition is on, the brake system warning light on the instrument panel cluster s h o ~ ~ l d...
Page 91 2-30 Reach under the driver’s side of the instrument panel and pull down on the manual release lever, which is located behind the parking brake pedal. Pull down on the yellow tab as shown by the arrow in the illustration. If the parking brake does not release, you should have your vehicle towed to your dealer for service.
Page 92 It can be da..derous tc ,et out 01 +ur vehicle if the shift lever is not fully in PARK (P) with the parking brake firmly set. Your vehicle can roll. If you have left the engine running, the vehicle can move suddenly. You or others could be injured.
Page 93 Leaving Your Vehicle With the Engine mning It can be dangerous to leave your vehicle with the engine running. Your vehicle could move suddenly if the shift lever is not fully in PARK (P) with the parking brake firmly set. And, if you leave the vehicle with the engine running, it could overheat and even catch fire.
Page 94: Engine Exhaust
Things that can burn could touch hot exhaust parts under your vehicle and ignite. Don’t park over papers, leaves, dry grass or other things that can burn. Engine Exhaust Engine exhaust can kill. It contains the gas carbon monoxide (CO), which you can’t see or smell.
Page 95: Running Your Engine While You Are Parked
Running Your Engine While You Are Parked It’s better not to park with the engine running. But if you ever have to, here are some things to know. the engine with the climate control system off could allow dangerous exhaust into your vehicle.
Page 96: Automatic Dimming Rearview Mirror With Onstar
Automatic Dimming Rearview Mirror with OnStar@ Your vehicle may have an automatic dimming rearview mirror with Onstar@ system controls. For more information about Onstar@, see QnStat@ System on page 2-40. When the automatic dimming feature is turned on, the mirror automatically changes to reduce glare from headlamps behind you.
Page 97 Mirror Operation (I> (On/Off): The on/off button is located on the lower left side of the mirror face for the electrochromic and compass functions of the rearview mirror. To turn on the automatic dimming feature, press and hold the on/off button for about three seconds. To turn off automatic dimming, press and hold the on/off button for about three seconds again.
Page 98: Outside Power Mirrors
3. Once the zone number appears in the display, press the on/off button quickly until the correct zone number appears in the display. Stop pressing ii~e buiiwn arid ihe mirror wiii reiurn io normai operation. If C appears in the compass window, the compass may need calibration.
Page 99: Outside Automatic Dimming Mirror
To adjust a mirror, press the arrows on the control pad to move the mirror in the direction you want the mirror to go. Adjust each mirror so you can see the side of your vehicle and the area behind your vehicle. The mirrors can be manually folded inward to prevent damage when going through an automatic car wash.
Page 100 Your passenger’s side mirror is convex. A convex mirror’s surface is curved so you can see more from the driver’s seat. This mirror does not have a dimming feature. A convex mirror can make t vehicles) look farther away than they really are. If you cut too sharply into the right lane, you could hit a vehicle on your right.
Page 101: Onstar
Onstar@ Onstar@ uses global positioning system (GPS) satellite technology, wireless communications, and call centers to provide you with a wide range of safety, security, information and convenience services. An Onstar@ subscription plan is included in the price of your vehicle. You can upgrade or extend your Onstar@ services to meet your needs.
Page 102 With OnStap Virtuai Advisor you can listen to the news, entertainment and informative topics, such as traffic and weather reports. You are able to listen and reply to your e-mail through your vehicle’s speakers. A completed Subscription Service Agreement is required prior to delivery of Onstar@ services and prepaid calling minutes are also required for Onstar@ Personal Calling and OnStap Virtual Advisor use.
Page 103: Programming The Homelink Transmitter
HomeLink@ Transmitter HomeLink@, a combined universal transmitter and receiver, provides a way to replace up to three hand-held transmitters used to activate devices such as gate operators, garage door openers, entry door locks, security systems and home lighting. Additional HomeLink@ information can be found on the internet at www.homelink.com or by calling 1-800-335-351 If your vehicle is equipped with the HomeLink@ Transmitter, it complies with Part 15 of the FCC Rules.
Page 104 Be sure that people and objects are c!ear nf the garage door or gate operator you are programming. When programming a garage door, is advised to park outside of the garage. It is recommended that a new battery be installed in your hand-held transmitter for quicker and mure accurate transmission of the radio frequency.
Page 105 8. Return to the vehicle. Firmly press and hold the programmed HomeLink@ button for two seconds, then release. Repeat the press/hold/release sequence a second time, and depending on the brand of the garage door opener (or other rolling code device), repeat this sequence a third time to complete the programming.
Page 106 SP-Z...
Page 107: Storage Areas
Storage Areas Glove Box The glove box is located in front of the passenger’s seat on the instrument panel. To lock the glove box door, insert the master key into the lock cylinder and turn it clockwise. Turn the key counterclockwise to unlock the door.
Page 108: Umbrella Holder
For your convenience, a garment hook is attached to each rear assist handle. Umbrella Holder The driver’s and passenger’s front seat cushion may be equipped with an umbrella holder. Gently slide the umbrella into the slot located under the front portion of the driver’s or passenger’s seat cushion.
Page 109: Sunroof
Sunroof The two switches that operate the optional sunroof are located on the overhead console and include VENT, ROOF, open and close. Press and hold the ROOF switch rearward to the first position to open the glass panel and sunshade. The sunshade also can be opened or closed manually.
Page 110: Memory Seat, Mirrors And Steering Wheel
Memory Seat, Mirrors and Steering Wheel If your vehicle has this feature, the controls are located on the driver's door panel. These buttons are used to program and recall memory settings for the driver's seating and outside rearview thn. f n l l n l r r i n n ctnnc tn m i r r n v nnritinnr I r n...
Page 111: Vehicle Personalization
To stop recall movement of the memory feature at any time, press one of the power seat controls or memory buttons. Two personalized exit positions can be set by first recalling the driving position (by pressing 1 or 2), then positioning the steering wheel and seat in the desired exit positions.
Page 112: Instrument Panel
Section Instrument Panel Overview Hazard Warning Flashers Other Warning Devices Horn Tilt Wheel Turn Signal/Multifunction Lever Exterior Lamps Interior Lamps Ultrasonic Rear Parking Assist (URPA) Accessory Power Outlets Ashtrays and Cigarette Lighter ... Climate Controls Dual Climate Control System Outlet Adjustment Rear Climate Control System ...
Page 113 Section 3 Trip Computer ... Oil Life Indicator ... 3.71 Audio System(s) ... Setting the Time for Radios without Radio Data Systems (RDS) Setting the Time for Radios with Radio Data Systems (RDS) Radio with Cassette and CD (Base Level) Radio with Cassette and CD (Up Level) ...
Page 114 €-E...
Page 116 A. Air Outiets B. Driver Information Center (DIC) Buttons C. Turn Signal/Multifunction Lever Climate Controls and Onstar@ Steering Wheel Controls (or Cellular Telephone Controls, If Equipped) Instrument Panel Cluster F. Windshield WiperlWasher Lever G. Audio Steering Wheel Controls H. Ignition Switch Air Outlet Thumbwheel Hazard Warning Flasher Button K.
Page 117: Hazard Warning Flashers
Hazard Warning Flashers Your hazard warning flashers let you warn others. They also let police know you have a problem. Your front and rear turn signal lamps will flash on and off. The hazard warning button is located on the center of the instrument panel between the two air vents.
Page 118 To tilt the wheel, hold the wheel and pull the lever. Then move the wheel to a comfortable the lever to lock the wheel in place. To operate the power tilt feature, push the control up and the steering wheel will tilt up. Push the control down and the steering wheel will go down.
Page 119: Turn Signal/Multifunction Lever
Push the control forward and the steering wheel moves toward the front of the vehicle. Push the control rearward and the steering wheel moves toward the rear of the vehicle. To set the memory position, see DIC Vehicle Personalization on page 3-60 and Memory Seat, Mirrors and Steering Wheel on page 2-49.
Page 120 When the low-beam headlamps are on, push the turn signal lever away from you to change the headlamps to high beam. This light on the instrument panel cluster will be on, indicating high-beam usage. Pull the turn signal lever toward you to return to low-beam headlamps.
Page 121 Nindshield Wipers You can control the windshield wipers by moving the lever with the wiper symbol on it. This lever is located on the right side of your steering column. For information on wiper-activated headlamp operation, refer to Exterior Lamps page 3-75.
Page 122 Your vehicle may be equipped with RainsenseTM ii wipers. The moisture sensor for this feature is mounted on the interior side of the windshield below the rearview mirror and is used to automatically operate the wipers by monitoring the amount of moisture build-up on the windshield.
Page 123 Windshield Washer The windshield washer has both a “demand” mode and a “programmed” mode, depending on the amount of windshield washer fluid you need. In freezing weather, don’t use your washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision.
Page 124 Cruise control can be dangerous where you can’t drive safely at a steady speed. So, don’t use your cruise control on winding roads or in heavy traffic. Cruise control can be dangerous on slippery roads. On such roads, fast changes in tire traction can cause needless wheel spinning, and you could lose control.
Page 125 Resuming a Set Speed Suppose you set your cruise control at a desired speed and then you apply the brake. This shuts off the cruise control. But you don’t need to reset it. Once the vehicle is traveling approximately 25 mph (40 km/h) or more, you can press RES/ACC (resume/accelerate) to return to your desired preset speed.
Page 126: Exterior Lamps
Ending cruise Control To turn off the cruise contr~l, step light!y pedal or press CRUISE ON/OFF on the steering wheel. Erasing Speed Memory When you turn off the cruise control or the ignition, your cruise control set speed memory is erased. Exterior Lamps The control located on the left side of the instrument...
Page 127 Wiper-Activated Headlamps This feature activates the headlamps and parking lamps after the windshield wipers have been in use for approximately six seconds. To operate, the Twilight Sentinel@ feature must be turned on. When the exterior lamp control is in the off or in the parking lamp position and the wiper control is on INT, LO or HI, the HEADLAMPS SUGGESTED message will appear on the Driver Information Center (DIC).
Page 128 If it's dark enough the Twi!igh? Sentine!@ OL!tSidF! lever is off, a HEADLAMPS SUGGESTED message will display on the Driver's information Center (DiCj. This message informs the driver that turning on the exterior lamps is recommended even though the DRL are still illuminated.
Page 129 Twilight Sentinel@ This lever is located below the exterior lamps control. It automatically turns the lamps on and off by sensing how dark it is outside. To operate the Twilight Sentinel@, leave the exterior lamps control off and slide the TWILIGHT lever to any position but OFF.
Page 131: Interior Lamps
Interior Lamps Control When the interior lamp lever is in OFF, the lamps are turned off. Only the driver’s door controls and ignition switch backlighting functions will operate. If the lever is in AUTO and a front door is opened, the overhead console light, front hush panel lamps and rear footwell lamps in the door will automatically come on.
Page 132 The front reading lamps are located ir, the overhead console. These lamps and the interior courtesy lamps come on when a door is opened and it is dark outside. The rear reading lamps will not come on when a front door is opened. The rear courtesy lamps are located on the rear headliner above the rear seat outboard positions.
Page 133: Ultrasonic Rear Parking Assist (Urpa)
Ultrasonic Rear Parking Assist (URPA) Ultrasonic Rear Parking Assist can help you to determine how close an object is to your rear bumper within a given area, making parking easier. If children, bicycles, or pets are behind your vehicle, RPA won’t tell you they are there. You could strike them and they could be injured or killed.
Page 134 f~Inctioning If the URPA system is not display will flash red, indicating that there is a problem. The iight will also flash red while driving if a trailer is attached to your vehicle, or a bicycle or object is on the back of, or hanging out of your trunk.
Page 135 Notice: Adding some electrical equipment to your e it or keep other things from working as they should. This wouldn’t be covered by your warranty. Check with your dealer before adding electrical equipment, and never use anything that exceeds the amperage rating. Follow the proper installation instructions that are included with any electrical equipment you install.
Page 136: Climate Controls
Dual Climate Control System With this system you can control the heating, cooling and ventilation for your vehicle. utnmmtie A n a r m + i n n W W G l A U L W I I I U L I \ r U L I W l AUTO (Axtm~atic): Wher: this button is pressed and the temperature is set, the system will automatically...
Page 137 Do not cover the solar sensor located in the center of the instrument panel, near the windshield. For more information on the solar sensor, see “Sensors” later in this section. When your vehicle is first started, the display will show the driver’s temperature setting, the fan speed and the air delivery mode.
Page 138 TEMP (Driver’s Temperature Snob): Press this to turn the climate control system on or off. Turn this knob clockwise or counterclockwise to manually increase or decrease the temperature inside your vehicie. TEMP (Passenger’s Temperature Knob): Press this knob to turn the passengers’ climate control system controls on or off.
Page 139 Sensors The solar sensor on your vehicle monitors the solar radiation inside your vehicle, then uses the information to maintain the selected temperature by initiating needed adjustments to the temperature, the fan speed and the air delivery system. The system may also supply cooler air to the side of the vehicle facing the sun.
Page 140 Rear LVindow Defogger The rear window defogger uses a warming grid to remove fog or frost from the rear window. will The rear window defogger only work when the ignition is in ON. REAR: Press this button to turn the rear window defogger on or off.
Page 141: Rear Climate Control System
Operation Tips Clear away any ice, snow or leaves from the air inlets at the base of the windshield that may block the flow of air into your vehicle. Use of non-GM approved hood deflectors may adversely affect the performance of the system. Keep the path under the front seats clear of objects to help circulate the air inside of your vehicle more effectively.
Page 142 OFF: Tgrn the mode knob Iocated or? the rear climate control panel to this position to turn off the airflow. If the passenger’s temperature knob located on the main climate control panel is off, the rear climate control system will be turned off and the settings selected for the main climate control panel wiil also be selected for the rear seat passengers.
Page 143 Passenger Compartment Passenger compartment air, both outside air and recirculated air, is routed through a passenger compartment filter. The filter removes certain contaminants from the air, including pollen and dust particles. routine scheduled maintenance. See Part A: Mainfenance Sewices on page 6-4 for replacement intervals.
Page 144: Climate Controls Personalization
Climate Controls PersGnaaization if your vehicie is equipped with this feature, you can store and recall climate control settings for the temperature, the fan speed and the direction of the airflow. Memory buttons 1 and 2 are located on the driver’s door panel and correspond to the numbers 1 or 2 found on the back of each remote keyless entry transmitter.
Page 145 Warning Lights, Gages and This part describes the warning lights and gages that may be on your vehicle. The pictures will help you locate them. Warning lights and gages can signal that something is wrong before becomes serious enough to cause an expensive repair or replacement.
Page 146 The instrument panel cluster designed to let you know at a glance how your vehicle is running. You’ll know how fast you’re going, how much fuel you’re using and many of the other things you’ll need to know to drive safely and economically.
Page 147 Speedometer and Odometer The speedometer lets you see your speed in both miles per hour (mph) and kilometers per hour (km/h). The odometer shows how far your vehicle has been driven, in either miles (used in the United States) or kilometers (used in Canada). You may wonder what happens if a vehicle has to have a new odometer installed.
Page 149 Vehicle Speed Limiter This feature prevents your vehicle from exceeding speeds that the tires are not rated for. When this happens, the engine’s fuel supply is shut off. When the vehicle speed slows, the fuel supply will come on again. Tachometer This gage indicates the engine speed in...
Page 150 There is an air bag readiness light on the instrument panel, which shows AIR BAG or the air bag symbol. The system checks the air bag’s electrical system for malfunctions. The light tells you if there is an electrical problem. The system check includes the air bag sensors, the air bag modules, the wiring and the crash sensing and diagnostic module.
Page 151: Brake System Warning And Parking Brake Indicator Light
Charging System Light When you turn the key to ON or START, this light will come on briefly to show that the generator and battery charging systems are working properly. If this light stays on, you need service and you should take your vehicle to the dealer at once.
Page 152 Your brake system may not be working properly if the brake system warning light is on. Driving with the brake system warning light on can lead to an accident. If the light is still on after you’ve pulled off the road and stopped carefully, have the vehicle towed for service.
Page 153: Traction Control System (Tcs) Warning Light
Traction Control System (TCS) Warning Light TRACTION CONTROL States United This warning light should come on briefly when the engine is started. If the warning light doesn’t come on then, have it fixed so it will be ready to warn you if there’s a problem. If it stays on, or comes on when you’re driving, there may be a problem with your traction control system and your vehicle may need service.
Page 154 TEMP United States This gage shows the engine coolant temperature. If the gage pointer moves into the shaded area, the engine too hot. That reading means the same thing as the warning the engine coolant has overheated. See Engine light Overhmtin_n on pa_ne .5-?9.
Page 155 This system is called OBD II (On-Board Diagnostics-Second Generation) and is intended to assure that emissions are at acceptable levels for the life of the vehicle, helping to produce a cleaner environment. The SERVICE ENGINE SOON or CHECK ENGINE light comes on to indicate that there is a problem and service is required.
Page 156 If the light stops flashing and remains on steady, see “If the Light Is On Steady” following. If the light continues to flash, when it is safe to do so, stop the vehicle. Find a safe place to park your vehicle. Turn the key off, wait at least 10 seconds and restart the engine.
Page 157: Oil Pressure Light
Emissions Inspection and Maintenance Programs Some state/provincial and local governments have or may begin programs to inspect the emission control equipment on your vehicle. Failure to pass this inspection could prevent you from getting a vehicle registration. Here are some things you need to know to help your vehicle pass an inspection: Your vehicle will not pass this inspection if the SERVICE ENGINE SOON or CHECK ENGINE light is on or not...
Page 158: Security Light
This light tells you if there could be a problem with your engine oii pressure. The light goes on when you turn your key to ON or START. It goes off once you start your engine. That’s a check to be sure the light works. If it doesn’t come on, be sure to have it fixed so it will be there to warn you if something goes wrong.
Page 159: Cruise Control Light
Cruise Control Light This light comes on whenever the cruise control system is in use. CRUISE It will go out when the system is turned off. See “Cruise Control” under Turn Signah‘Multifunction page Lever on 3-8 for more information. Fuel Gage FUEL United States 3-48...
Page 160 6P-6...
Page 161 AVG MPH (Average Miles per Hour): This message shows the average speed you have traveled at since the last time you reset the value. To reset the value, press the INFO button to display AVG MPH then press and hold the INFO RESET button until 0.0 AVG MPH is displayed.
Page 162 MPG INST (Instantaneous Miles per message shows the instantaneous fuel economy which varies with your driving conditions, such as acceieration, braking and the grade of the road being traveled. The INFO RESET button does not function in this mode. BATTERY VOLTS: This message shows the current battery voltage.
Page 163 DIC Warnings and Messages These messages will appear if there is a problem sensed in one of your vehicle’s systems. Vehicles that are first sold in Canada will have a number after each message. This number helps to identify the problem.
Page 164 CHANGE ENGINE OIL 82: This means that the life of the engine oil has expired and it should be changed within 200 miles. After an oil change, the Oii Life Indicator must be reset. See Oil Life Indicator on page 3-71. See Engine Oil on page 5- 15. CHANGE TRANS FLU!D 47: This message will appear when it is time to change the transaxle fluid.
Page 165 CHECK TIRE PRESSURE 144: displayed when the Tire Pressure Monitor (TPM) system detects a low or high tire pressure condition in one or more of the road tires. By pressing the INFO button up or down, the DIC display will show which tire or tires do not have the correct inflation pressure.
Page 166 DR!VE NO; X (1 OF? 2 ) : This message wi!! he disp!ayed with the key in ON and while entering FEATURE PROGRAMMiNG, but oniy if the vehicle is equipped with memory seats. The message will show which driver is activating the personalization feature. It will only stay on for five seconds.
Page 167 LEFT REAR DOOR AJAR 142: The left rear door is open or ajar when this message appears. The ignition must be in ON and the transaxle not in PARK (P) for this message to display. A chime will sound if the vehicle’s speed is greater than 3 mph km/h).
Page 168 SERVICE STAB!L!TY SYS 54: !f ync! SERVICE STABILITY SYS message, it means there may be a problem with your stability enhancement system. If you see this message, try to reset the system (stop, turn off the engine, then start the engine again).
Page 169 STABILITY SYS ENGAGED STABILITY SYS ENGAGED message on the Driver Information Center. means that an advanced, computer-controlled system has come on vehicle continue to go in the direction in which you’re steering. This stability enhancement system activates when the computer senses that your vehicle is just starting to spin, as it might if you hit a patch of ice or other slippery spot on the road.
Page 170 TRAGT!ON SUSPENDED 56: This I-nessage displays when the traction control system has been temporarily shut off because your vehicle's brakes have overheated. This message does not indicate a problem with your vehicle's traction control system. After a few minutes, the traction control system will be available again and the TRACTION READY message will appear.
Page 171: Dic Vehicle Personalization
DIC Vehicle Personalization Your vehicle is equipped with personalization capabilities that allows you to program certain features to a preferred setting for up to two people. The number of programmable features varies depending upon which model of the vehicle is purchased. On all vehicles, features such as climate control settings, radio preset settings, exterior lighting at unlock, remote lock and unlock confirmation, and automatic door locks...
Page 172 Programmable !Modes Mode I : ON Mode 2: OFF Before your vehicle was shipped from the factory, it was programmed to Mode 1. The mode to which the vehicle was programmed may have been changed since left the factory. To determine the mode to which the vehicle is programmed or to program the vehicle to a different mode, do the following: 1.
Page 173 Auto Exit Seat If your vehicle has the optional memory package, you will have this feature. This feature will move the driver’s seat to the previously programmed exit position when the ignition is turned off and the driver’s door is opened. Programmable Modes Mode 1: ON Mode 2: OFF...
Page 174 3. Tc! turn on the feature, press the Oh!!OFF hutfor! until ON appears on the DIC display. To turn it off, press the ONiOFF button until OFF appears on the display. The mode you selected is now set. You can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle.
Page 175 Lights Flash at Lock This feature allows the parking lamps to flash once when the remote keyless entry transmitter is used to lock the vehicle. All doors must be closed for this feature to work, and the lamps will not flash if the manual parking lamps or headlamps are active.
Page 176 featL!rej 3, To turn on the press the ON/OFF button until ON appears on the DIC display. To turn it off, press the ONiOFF button untii OFF appears on the display. The mode you selected is now set. You can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle.
Page 177 Doors Lock in Gear With the ignition in ON and all the doors closed, this feature allows the vehicle’s doors to automatically lock when the driver shifts the transaxle out of PARK (P). Programmable Modes Mode 1: ON Mode Before your vehicle was shipped from the factory, it was programmed to Mode 1.
Page 178 This feature allows the driver's door to automatically unlock when the ignition key is turned to OFF. All other doors will remain locked until the unlock button on either front door armrest or on the remote keyless entry transmitter is pressed. Programmable Modes Mode 1: ON Mode...
Page 179 Doors Unlock Key Off This feature will automatically unlock all doors when the ignition key is turned to OFF. Programmable Modes Mode 1: ON Mode Before your vehicle was shipped from the factory, programmed to Mode 2. The mode to which the vehicle was programmed may have been changed since it left the factory.
Page 180 3. To turn on the feature, press the OI\?/O!=F button until ON appears on the DIC display. To turn it off, press the ON/OFF button until OFF appears on the display. The mode you selected is now set. You can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle.
Page 181 Driver’s Name SetIRecall If your vehicle has the optional memory package, you will have this feature. This feature allows individual driver’s names to be displayed in the DIC when the ignition is turned to ON. This feature only works when the remote keyless entry transmitter is used to unlock the vehicle or when buttons 1 or 2 on the driver’s door are pressed.
Page 182: Oil Life Indicator
Oil Life Indicator This feature lets you know when to change the engine oil. It's based on the engine oil temperatures and your driving patterns. rlicnlatr I h l C A nrnec y , pl ulapl u a€?- 1 1 V I LI I until ENGINE OIL LIFE appears.
Page 183: Audio System(S)
Audio System(s) Notice: Before you add any sound equipment to your vehicle like a tape player, CB radio, mobile telephone or two-way radio be sure you can add what you want. If you can, it’s very important to do it properly. Added sound equipment may interfere with the operation of your vehicle’s engine, Delphi Electronics radio or other systems, and even damage them.
Page 184 XMTM Radio Satellite Service (USA Only): XMTM is a continental U.S. based satellite radio service that offers 100 coast to coast channels including music, news, sports, talk and children’s programming. XMTM provides digital quality audio and text information, including song title and artist name. A service fee is required in order to receive the XMTM service.
Page 185 Finding a Station BAND: Press this button to select weather, FM1, FM2, AM, or XM1, XM2 if your radio is equipped with XMTM Satellite Radio Service. TUNE SEEK Y : This button can be pressed positions. Press this button to the first position to manually tune to the next or to the previous stations.
Page 186 TONE: Press and release this button until the desired tone control (bass, treble or midrange) appears on the display. The radio keeps separate tone settings for each band, preset and source. LEVEL After selecting the desired tone control, press the plus or minus symbol on this button to select the desired level.
Page 187 XMTM Radio Messages indicates content with Tune to another station. If this station was one of your 3-76...
Page 188 Radio Display Message No CAT Info Category Name not available Not Found No channel available for the chosen category No Information No TextAnformational message available XM Theftlocked Theft lock active XM Radio ID Radio ID label (channel 0) Unknown Radio ID not known (should only be if hardware taiiurej Check XM Receiver...
Page 189 Playing a Cassette Tape With the radio on, insert a cassette tape. The tape will begin playing as soon as it is inserted. When one side of your cassette tape is done playing, auto reverse plays the other side of your cassette tape. A cassette tape may be loaded with the radio off but it will not start playing until the radio is on.
Page 190 cassette Tape P4essafl- If an error occurs whiie trying to piay a cassette tape, it could be for one of the following reasons: The cassette tape is tight and the cassette player cannot turn the hubs of the tape. Hold the cassetie tape with the open end down and try turning the right hub counterclockwise with a pencil.
Page 191: Radio With Cassette And Cd (Base Level)
Compact Disc Messages If the disc comes out, it could be for one of the following reasons: You’re driving on a very rough road. When the road becomes smoother, the disc should play. It’s very hot. When the temperature returns to normal, the disc should play.
Page 192 This system relies upon receiving specific information from these stations and will only work when the information avaiiabie. in rare cases, a radio station may broadcast incorrect information that will cause the radio features to work improperly. If this happens, contact the radio station.
Page 193 Finding a Station BAND: Press this button to select weather, FMI, FM2, AM, or XMI, XM2 if your radio is equipped with XMTM Satellite Radio Service. TUNE SEEK Y : This button can be pressed to two positions. Press this button to the first position to manually tune to the next or to the previous stations.
Page 194 Setting the Tone (Bass-/Treb!e) TONE: Press and release this button until the desired tone BASS, TREBLE or MIDRANGE appears on the display. The radio keeps separate tone settings for each band, preset (except weather band presets) and source. LEVEL After selecting the desired tone control, press the plus or minus symbol on this button to select the desired level.
Page 195 RDS Messages ALERT!: Alert warns of local or continental U.S.-based emergencies. When an alert announcement comes on the current radio station or a related network station, you will hear it, even if the volume is muted, a cassette tape or compact disc is playing, or if RDS mode is turned off.
Page 196 For XMTM (USA onlv, if your radio is equipped with XMTM Satellite Rad6 Service), press this button while in XM mode to retrieve various pieces of information related to the current song or channel. By pressing and releasing the MSG button, you may retrieve four different categories of information: Artist Name/Feature, Song/Program Title, Channel Category that may be broadcast on that channel.
Page 197 Radio Display Message XL (Explicit Language XL on the radio display, Channels) after the channel name, indicates content with explicit language. Updating encryption code No XM signal Loss Loading XM Acquiring channel audio (after 4 second delay) Channel Off Air Channel not in service Channel Unavail Channel no longer...
Page 198 Radio Display Message No CAT Info XM Theftlocked Theft lock active XM Radio ID Radio ID label (channel 0) Unknown Radio ID not known (should only be if hardware failure) XMTf4 Radio iviessages jconi'a j Condition No category information is available at this time on this channel.
Page 199 Playing a Cassette Tape With the radio on, insert a cassette tape. The tape will begin playing as soon as it is inserted. When one side of your cassette tape is done playing, auto reverse plays the other side of your cassette tape. A cassette tape may be loaded with the radio off but it will not start playing until the radio is on.
Page 200 Cassette Tape Messages If an error occurs while trying to play a cassette tape, it could be one of the following has occurred: The cassette tape is tight and the cassette player cannot turn the hubs of the tape. Hold the cassette tape with the open end down and try turning the right hub counterclockwise with a pencil.
Page 201 6 RDM (Random): Press this pushbutton to listen to the tracks in random instead of sequential order. RDM will appear on the display. Press RDM to turn off random play. RDM will disappear from the display. SEEK Y : Press the up or the down arrow to seek to the next or to the previous track.
Page 202: Navigatiodradio System
NavigationiRadio System Navigation/Radio Display and Controls The display screen is located in the center of the instrument panel. There are “hard” buttons and a touch sensitive screen. Your vehicle may be equipped with an AM-FM radio navigation radio system that includes digital sound processmg (LISP), a Hadio Data System program ”type”...
Page 203 Once you have loaded the discs in the magazine, slide open the door of the compact disc (CD) changer. Push the magazine into the changer in the direction of the arrow marked on top of the magazine. 3-92 Close the door by sliding it all the way to the right. When the door is closed, the changer will begin checking for discs in the magazine.
Page 204 (Previousj/X TUNE SEEK Y : Press this i PREV pushbutton to seek to the previotrs track on the CD. !f playing the first track of the CD, pressing the PREV pushbutton will seek to the last track of the CD. 2 NEXTDY TUNE SEEK Y : Press this pushbutton to seek to the next track on the CD.
Page 205: Radio Personalization With Home And Away Feature
Compact Disc Changer Errors CD CHANGER ERROR: This message may be displayed for one of the following reasons: You’re driving on a very rough road. When the road becomes smoother, the disc should play. The disc is dirty, scratched, wet or loaded label side up.
Page 206: Theft-Deterrent Feature
Theft-Deterrent Feature THEFTLOCK@ is designed to discourage theft of your radio. Your vehicle has a “built in” theft-deterrent feature on each radio that is automatic programming required. The radio in your vehicle cannot be used in any other vehicle. When the radio was originally installed in your vehicle at the factory, it stored the Vehicle Identification Number (VIN).
Page 207: Understanding Radio Reception
Understanding Radio Reception The range for most AM stations is greater than for FM, especially at night. The longer range, however, can cause stations to interfere with each other. AM can pick up noise from things like storms and power lines. Try reducing the treble to reduce this noise if you ever get it.
Page 208 Your tape player should be cleaned regularly after every 50 hours of use. Your radio may display CLEAN TAPE to indicate that yog have used your tape player for 50 hours without resetting the tape clean timer. If this message appears on the display, your cassette tape player needs to be cleaned.
Page 209: Care Of Your Cds
Care of Your CDs Handle discs carefully. Store them in their original cases or other protective cases and away from direct sunlight and dust. If the surface of a disc is soiled, dampen a clean, soft cloth in a mild, neutral detergent solution and clean it, wiping from the center to the edge.
Page 210: Driving Your Vehicle
Section four Driving. the Road. and Your Vehicle ... 4-2 Defensive Driving Drunken Driving Control of a Vehicle Braking Traction Control System (TCS) ... Magnetic Ride Control Steering Off-Road Recovery Passing Loss of Control Driving at Night Driving in Rain and on Wet Roads Driving Your Vehicle City Driving 4 .
Page 211: Defensive Driving
Your Driving, the Road, and Your Vehicle Defensive Driving The best advice anyone can give about driving is: Drive defensively. Please start with a very important safety device in your vehicle: Buckle up. See Safety Belts: They Are Everyone on page 1-6. Defensive driving really means “be ready for anything.”...
Page 212 Many adults by some estimates, adult population choose never to drink alcohol, so they never drive after drinking. For persons under 21, it’s against the law in every U.S. state to drink alcohol. There are good medical, psychological and developmental reasons for these laws. The obvious way to eliminate the leading highway safety problem is for people never to drink alcohol and then drive.
Page 213 There is a gender difference, too. Women generally have a lower relative percentage of body water than men. Since alcohol is carried in body water, this means that a woman generally will reach a higher BAC level than a man of her same body weight when each has the same number of drinks.
Page 214 There’s something else about drinking and driving that many people don’t know. Medical research shows that aieshsi in a person’s system can make crash injuries worse, especially injuries to the brain, spinal cord or heart. This means that when anyone who has been drinking driver or passenger crash, that person’s chance of being killed or...
Page 215: Braking
Braking Braking action involves perception time and reaction time. First, you have to decide to push on the brake pedal. That’s perception time. Then you have to bring up your foot and do That’s reaction time. Average reaction time is about that’s only an average.
Page 216 Let’s say the road is wet and you’re driving safely. Suddenly, an animal jumps out in front of you. You slam on the brakes and continue braking. Here’s what happens with ABS: A computer senses that wheels are slowing down. If one of the wheels is about to stop rolling, the computer will separately work the brakes at each front wheel and at both rear wheels.
Page 217: Traction Control System (Tcs)
As you brake, your computer keeps receiving updates on wheel speed and controls braking pressure accordingly. Remember: Anti-lock doesn’t change the time you need to get your foot up to the brake pedal or always decrease stopping distance. If you get too close to the vehicle in front of you, you won’t have time to apply your brakes if that vehicle suddenly slows or stops.
Page 218 If your vehicle is in cruise control when the traction control system begins to limit wheel spin, the cruise eontroi wiil auiomaiicaiiy disengage. When roaci conditions allow you to safely use it again, you may reengage the cruise control. See Cruise Control under Turn SignaVMultifunction Lever on page 3-8.
Page 219: Magnetic Ride Control
Magnetic Ride Control Magnetic Ride Control automatically adjusts the ride of your vehicle. Automatic ride control is achieved through a computer used to control and monitor the suspension system. The controller receives input from various sensors to determine the proper system response.
Page 220 Since your vehicle is equipped with Stabilitrak@ you may see the STABILITY SYS ENGAGED message on the Driver Mxmatiori Center. See “Stabiiiiji System Warnings and Messages Engaged Message” under DIC on page 3-52. Speed limit signs near curves warn that you should adjust your speed.
Page 221: Off-Road Recovery
An emergency like this requires close attention and a quick decision. If you are holding the steering wheel at the recommended 9 and 3 o’clock positions, you can turn it a full 180 degrees very quickly without removing either hand. But you have to act fast, steer quickly, and just as quickly straighten the wheel once you have avoided the object.
Page 222: Passing
PassIng The driver of a vehicie about to pass another on a two-lane highway waits for just the right moment, accelerates, moves around the vehicle ahead, then goes back into the right lane again. A simple maneuver? Not necessarily! Passing another vehicle on a two-lane highway is a potentially dangerous move, since the passing vehicle occupies the same lane as oncoming traffic for several seconds.
Page 223: Loss Of Control
Check your mirrors, glance over your shoulder, and start your left lane change signal before moving out of the right lane to pass. When you are far enough ahead of the passed vehicle to see its front in your inside mirror, activate your right lane change signal and move back into the right lane.
Page 224 With Stahi!itrak@, yclu m q see !he ST,A.B!L!TY SYS ENGAGED message on the Driver Information Center. See “Stability Sys Engaged Message” under DIC Warnings Messages on page 3-52. Of course, traction is reduced when water, snow, ice, gravel or other material is on the road. For safety, you’li want to slow down and adjust your driving to these conditions.
Page 225 Here are some tips on night driving. Drive defensively. Don’t drink and drive. Since you can’t see as well, you may need to slow down and keep more space between you and other vehicles. Slow down, especially on higher speed roads. Your headlamps can light up only so much road ahead.
Page 227 Driving too fast through large water puddles or even going through some car washes can cause problems, too. The water may affect your brakes. Try to avoid puddles. But if you can’t, try to slow down before you hit them. 4-1 8 Wet brakes can cause accidents.
Page 228 Hydrop!anIng Hydropianing is dangerous. So much water can buiia up under your tires that they can actually ride on the water. This can happen if the road is wet enough and you’re going fast enough. When your vehicle is hydroplaning, it has little or no contact with the road. Hydroplaning doesn’t happen often.
Page 229: City Driving
City Driving One of the biggest problems with city streets is the amount of traffic on them. You’ll want to watch out for what the other drivers are doing and pay attention to traffic signals. 4-20 Here are ways to increase your safety in city driving: Know the best way to get to where you are going.
Page 230 Mile for mile, freeways (also called thruways, Parkways, expressways, turnpikes or superhlghways) are the safest of all roads. But they have their own special rules. The most important advice on freeway driving is: The Keep up with traffic and keep to the right.
Page 231: Before Leaving On A Long Trip
Before Leaving on a Long Trip Make sure you’re ready. Try to be well rested. If you must start when you’re not fresh work don’t plan to make too many miles that first part the journey. Wear comfortable clothing and shoes you can easily drive in.
Page 232 Driving on steep hills or mountains is different from A & , & I - + "-.ll:-- -..I.- l l a t I U I I I I I ~ L ~ ; I I ~ I I . U I I V I I I ~ I I I regu!ar!)r IR steep countpj, or if you're ririva \ m l r...
Page 233: Winter Driving
Coasting downhill in NEUTRAL (N) or with the ignition off is dangerous. Your brakes will have to do all the work of slowing down. They could get so hot that they wouldn’t work well. You would then have poor braking or even none going down a hill.
Page 234 Include an ice scraper, a small brush or broom, a supply of windshield washer fluid, a rag, some winter outer clothing, a small shovel, a flashlight, a red c!x!p!e ref!ecti\,lz wxning t:ixg!es. Azd, if C!”fh you will be driving under severe conditions, include a small bag of sand, a piece of old carpet or a couple of burlap bags to help provide traction.
Page 235 What’s the worst time for this? “Wet ice.” Very cold snow or ice can be slick and hard to drive on. But wet ice can be even more trouble because it may offer the least traction of all. You can get wet ice when it’s about freezing (32°F;...
Page 236 heavy ctnpped by snov.~, you could \~nll 2t-p -‘ serious situation. You should probably stay with your vehicle unless you know for sure that you are near help and you can hike through the snow. Here are some things to do to summon help and keep yourself and your passengers safe: Turn on your hazard flashers.
Page 237 You can run the engine to keep warm, but be careful. 4-28 Snow can trap exhaust gases under your vehicle. This can cause deadly CQ (carbon monoxide) gas to get inside. CO could overcome you and kill you. You can’t see it or smell vehicle.
Page 238 rhen, shut the engine off and close the window almost a!! the way to preserve the heat. Start the engine again and repeat Phis only when you ieei reaiiy uncomforiabie from the cold. But do it as little as possible. Preserve the fuel as long as you can.
Page 239: Towing
Towing Towing Your Vehicle Consult your dealer or a professional towing service if you need to have your disabled vehicle towed. See Roadside Service on page 7-5. If you want to tow your vehicle behind another vehicle for recreational purposes (such as behind a motorhome), see Recreational Vehicle Towing following.
Page 240 Do!!y Towing Your vehicle can be towed using a dolly. To tow your vehicle using a dolly, follow these steps: 1. Put the front wheels on the dolly. 2. Put the vehicle in PARK (P). 3. Set the parking brake and then remove the key. 4.
Page 241 MFD BY GENERAL MOTORS CORP THIS VEHICLE TO ALL CONFORMS The other label is the Certification label, found on the rear edge of the driver’s door. It tells you the gross weight capacity of your vehicle, called the Gross Vehicle Weight Rating (GVWR).
Page 242 Things you put inside your vehicle can strike and injure people in a sudden stop or turn, or in a crash. Put things in the trunk of your vehicle. In a trunk, put them as far forward as you can. Try to spread the weight evenly.
Page 243 That’s the reason for this part. In important trailering tips and safety rules. Many of these are important for your safety and that of your passengers. So please read this section carefully before you pull a trailer. Load-pulling components such as the engine, transaxle, wheel assemblies and tires are forced to work harder against the drag of the added weight.
Page 244 (3 677 kg) total loaded vehicle and trailer for STS models. You can ask your dealer for our trailering information or advice, or you can write us at: Cadillac Customer Assistance Center Cadillac Motor Car Division P.O. Box 33169 Detroit, MI 48232-51 69...
Page 245 Total Weight on Your Vehicle’s Tires Be sure your vehicle’s tires are inflated to the upper limit for cold tires. You’ll find these numbers on the Tire-Loading Information label at the rear edge of the driver’s door or see Loading Your Vehicle on page 4-31. Then be sure you don’t go over the GVW limit for your vehicle, including the weight of the trailer tongue.
Page 246 Be sure to read and follow the instructions for the trailer brakes so you’ll be able to install, adjust and maintain them properly. Be sure to read and ioiiow the instructions for the trailer brakes so you’ll be able to install, adjust and maintain them properly.
Page 247 Turn Signals When Towing a Trailer When you tow a trailer, your vehicle may need a different turn signal flasher and/or extra wiring. Check with your dealer. The arrows on your instrument panel will flash whenever you signal a turn or lane change.
Page 248 When You Are Ready to Leave After Parking on a Hill: 1. Apply your regular brakes and hold the pedal down while you: start your engine, shift into a gear, and make sure the parking brake has released. 2. Let up on the brake pedal. 3.
Page 250: Service And Appearance Care
Section Service ... Doing Your Own Service Work Adding Equipment to the Outside of Your Vehicle ... Fuel ... Gasoline Octane Gasoline Specifications ... California Fuel ... Additives ... Fuels in Foreign Countries Filling Your Tank ... Filling a Portable Fuel Container ... Checking Things Under the Hood ...
Page 251 Section 5 Uniform Tire Quality Grading ... Wheel Alignment and Tire Balance ... 5-70 Wheel Replacement ... Tire Chains ... If a Tire Goes Flat ... Changing a Flat Tire Compact Spare Tire ... Appearance Care ... Cleaning the Inside of Your Vehicle Care of Safety Belts ...
Page 253: Doing Your Own Service Work
Doing Your Own Service Work If you want to do some of your own service work, you’ll want to use the proper service manual. It tells you much more about how to service your vehicle than this manual can. To order the proper service manual, see Service Publications Ordering Information on page 7-9.
Page 254: Gasoline Octane
Fue! Use of the recommended fuei an important part of the proper maintenance of your vehicle. Gasoline Octane Use regular unleaded gasoline with a posted octane of 87 or higher. However, for best performance and for trailer towing, you may wish to use middle grade or premium unleaded gasoline.
Page 255: California Fuel
California Fuel If your vehicle is certified to meet California Emission Standards (see the underhood emission control label), it is designed to operate on fuels that meet California specifications. If this fuel is not available in states adopting California emissions standards, your vehicle will operate satisfactorily on fuels meeting federal specifications, but emission control system performance may be affected.
Page 256 a.re not reformn!ated fnr !nw Some gasolines that emissions may contain an octane-enhancing additive called methyicyciopentadienyi manganese tricarbonyi ("1); ask the attendant where you buy gasoline whether the fuel contains MMT. General Motors does not recommend the use of such gasolines. Fuels containing MMT can reduce the life of spark plugs and the performance of the emission control system may be affected.
Page 257: Filling Your Tank
Filling Your Tank Fuel vapor is highly flammable. It burns violently, and that can cause very bad injuries. Don’t smoke if you’re near fuel or refueling your vehicle. Keep sparks, flames and smoking materials away from fuel. The fuel cap is located behind a hinged door on the driver’s side of your vehicle.
Page 258 button is located on the left side oi the instrument panel below the exterior lamp control. To open the fuel door, press the fuel door release button upward. The vehicle must be NEUTRAL (N) and the valet lockout button must be in OFF.
Page 259 While refueling, hang the fuel cap by the tether from the hook on the fuel door. To remove the fuel cap, turn it slowly to the left (counterclockwise). The fuel cap has a spring in it; if you let go of the cap too soon, it will spring back to the right.
Page 260 When you put the fuel cap back on, turn it to the right (clockwise) until you hear. a clicking sound. Make cap. sure yoti firiiy insiaii the The diagnostic system can determine if the fuel cap has been left off or improperly installed.
Page 261: Checking Things Under The Hood
Checking Things Under the Hood An electric fan under the hoa- and injure you even when the engine is not running. Keep hands, clothing and tools away from any underhood electric fan. 5-1 2 Things that burn can get on hot engine parts and start a fire.
Page 262 To lift the hood, use the Mowing steps: 1. Pull the lever inside the vehicle to open the hood. It is located on the lower left side of the instrument panel. 2. Then go to the front of the vehicle and find the secondary hood release which is located below the front grille.
Page 264 A. Windshield Washer Fluid Reservoir B. Underhood Fuse Block C. Power Steering Fluid Reservoir D. Engine Oil Fill Location E. Engine Oil Dipstick F. Brake Master Cylinder Reservoir G. Transaxle Fluid Cap and Dipstick H. Engine Air Cleaner/Filter I. Engine Coolant Surge Tank and Pressure Cap If the CHECK OIL LEVEL message appears on the instrument cluster, it means you need to check your engine oil level right away.
Page 265: Engine Compartment Overview
Checking Engine Oil It’s a good idea to check your engine oil every time you get fuel. In order to get an accurate reading, the oil must be warm and the vehicle must be on level ground. The engine oil dipstick is located behind the radiator on the driver’s side of the vehicle.
Page 266 If the oil is at or below the cross-hatched area of the dipstick, then you’ll need to add at least one quart of oil. But you must use the right kind. This part explains what kind of oil to use. For engine oil crankcase capacity, see Capacities and §pecifications on page 5- 100.
Page 267 What Kind of Engine Oil to Use Oils recommended for your vehicle can be identified by looking for the starburst symbol. This symbol indicates that the oil has been certified by the American Petroleum Institute (API). Do not use any oil which does not carry this starburst symbol. If you choose to perform the engine oil change service yourself, be sure...
Page 268 chart shown previnus!y, M E 5W-3Q Is the As in the only viscosity grade recommended for your vehicle. You should look for and use only oils which have the API Starburst symbol and which are also identified as SAE 5W-30. If you cannot find such SAE 5W-30 oils, you can use an SAE IOW-30 oil which has the API Starburst symbol, if it's going to be 0°F (-18°C) or above.
Page 269 How to Reset the CHANGE ENGINE OIL Message The GM Oil Life SystemTM calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHANGE ENGINE OIL message in the Driver Information Center (DIC) being turned on, reset the...
Page 270 The engine air cleaner/filter is located next to the coolant surge tank on the driver’s side of the vehicle. See Engine Compartment Overview on page for more information on location. Be sure the engine has cooled before following these steps to inspect replace the engine air cleanedfilter: 2.
Page 271 3. Unhook both of the engine air cleanedfilter cover latches. 4. Move the cover out of the way. 5-22 5. Take out the engine air cleaner/filter and remove any loose debris that may be found lying in the base. 6. Install a new air filter element. See Normal Maintenance Replacement Parts on page 5-707 for the proper type.
Page 272 3. Reinstall the clean air duct over sensor. Make sure that the duct is secure around the entire outer edge of the sensor. 4. Tighten the air duct clamp. Refer to the Maintenance Schedule to determine when to replace the air filter. See Part A: Scheduled Maintenance Services on page 6-4.
Page 273: Engine Air Cleanedfilter
How to Check Because this operation can be a little difficult, you may choose to have this done at the dealership service department. If you do it yourself, be sure to follow all the instructions here, or you could get a false reading on the dipstick. Notice: loo much or too little fluid can damage your transaxle.
Page 274 A.fter removing the engine air c!eaner!?i!ter assembly to reach the transaxle fluid cap, turn the cap counterclockwise to remove. Pull out the dipstick and wipe it with a clean rag or paper towel. Push it back in all the way, wait three seconds and then pull it back out again.
Page 275 Once the transaxle fluid has been changed, the transaxle fluid change indicator must be reset. Use the following steps reset the indicator: 1. Press the INFO button the Driver information TRANS Center (DIC) until FLUID LIFE is displayed. 2. Press and hold the INFO RESET button until 100°/o is displayed.
Page 276 Use a mixture of one-haif clean, drinkable water and one-half DEX-COOL@ coolant which won’t damage aluminum parts. If you use this coolant mixture, you don’t need to add anvthir- else. n water to yo1 cooling Addin- mly system can be dangerous. Plain water, or some other liquid such as alcohol, can boil before the proper coolant mixture will.
Page 277 Checking Coolant The engine coolant surge tank is located in the engine compartment on the driver's side of the vehicle. See Engine Compartment Overview on page information on location. 5-28 Turning the surge tank pressure cap wher re engine and radiator are hot can allow steam and scalding liquids to blow out and burn you badly.
Page 278: Coolant Surge Tank Pressure Cap
If you need more coolant, add the proper EEX-COOL@ coolant mixture at the surge tank, but only when the engine is cool. You can burned spill coolant or. .,ot I O U engine parts. Coolant contains ethylene glycol, and it will burn if the engine parts are hot enough.
Page 279 If Steam Is Coming From Your Engine Steam from an overheated engine can burn you badly, even if you just open the hood. Stay away from the engine if you see or hear steam coming from it. Just turn it off and get CAUTION: (Continued) 5-30 everyone away from the veh,,,e...
Page 280 !f No Steam !s Go!??Ing Fro!?? Your Engine An overheat warning, along with a low coolant message, can indicate a serious problem. See DIC Warnings and Messages on page 3-52. If you get an engine overheat warning with no low coolant message, but see or hear no steam, the problem may not be too serious.
Page 281: Cooling System
Cooling System When you decide it's safe to lift the hood, here's what you'll see: A. Coolant Surge Tank with Pressure Cap B. Electric Engine Cooling Fans 5-32 An electric engine cooling fan under the hood can start up even when the engine is not running and can injure you.
Page 282 A low coolant level should be indicated by a CHECK COOLANT LEVEL message on the Driver Information Center. you may have a !eak at the presslrre cap in the radiator hoses, heater hoses, radiator, water pump or somewhere else in the cooling system. ses, and other engine Don’t touch them.
Page 283 How to Add Coolant to the Coolant Surge Tank If you haven’t found a problem yet, check to see if coolant is visible in the surge tank. If coolant is visible but the coolant level isn’t at or above the fill mark at the forward edge of the surge tank, add a 50/50 mixture of clean, drinkable water and DEX-COOL@ coolant at the coolant surge tank, but be sure the cooling...
Page 284 Adding only plain water to your cooling system can be dangerous. Plain water, or some other liquid such as alcohol, can boil before the proper coolant mixture will. Your vehicle’s coolant warning system is set for the proper coolant mixture. With plain water or the wrong mixture, your engine could get too hot but you wouldn’t get the overheat warning.
Page 285 1. Park the vehicle on a level surface. You can remove the coolant surge tank pressure cap when the cooling system, including the coolant surge tank pressure cap and upper radiator hose, is no longer hot. Turn the pressure cap slowly counterclockwise (left) about one-quarter turn and then stop.
Page 286 4. With the coolant surge tank pressure cap off, start the engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine cooling fans. By this time, the coolant level inside the coolant Driver surge tank may be lower.
Page 287: Power Steering Fluid
Power Steering Fluid The power steering fluid reservoir is located next to the underhood fuse block on the passenger’s side of the vehicle. See Engine Compartment Overview page 5-14 for more information on location. When to Check Power Steering Fluid It is not necessary to regularly check power steering fluid unless you suspect there is a leak in the system or you hear an unusual noise.
Page 288 Adding Washer F h i j When your vekic!e’s windshield washer fluid level becomes low, a CHECK WASHER FLUID message will appear on the Driver Information Center (DIC). You will need to add fluid soon. The windshield washer fluid reservoir is located next to the underhood fuse block on the passenger’s side of the vehicle.
Page 289: Brakes
Brakes Brake Fluid Your brake master cylinder reservoir is on the driver’s side of the engine compartment. It is filled with DOT-3 brake fluid. See Engine Compartment Overview on page 5-14. There are only two reasons why the brake fluid level in the reservoir might go down.
Page 290 What to Add When you do need brake fluid, use only DOT-3 brake fluid. Use new brake fluid from a sealed container only. See Part D: Recommended Fluids on page 6- 15. Always clean the brake fluid reservoir cap and the area around the cap before removing it.
Page 291 Brake Wear Your vehicle has four-wheel disc brakes. Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the brake pads are worn and new pads are needed. The sound may come and go or be heard all the time your vehicle is moving (except when you are pushing on the brake pedal firmly).
Page 292: Battery
The braking system on a vehicle is complex. !ts many parts have to be of top quality and work well together if the vehicle is to have really good braking. Your vehicle was designed and tested with top-quality GM brake parts. When you replace parts of your braking system for example, when your brake linings wear down and you need new ones put in...
Page 293 To be sure the vent hose (A) is properly attached, the vent hose connectors (B) must be securely reattached to the vent outlets (C) on each side of the battery, and the vent assembly grommet (D) must be secured to the floor pan (E).
Page 294 Jumo Startinu - ---- If your baitery has run aown, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to follow the steps below to do it safely. Batteries can hurt you. They can be dangerous because: They contain acid that can burn you.
Page 295 The remote positive (+) terminal is located in the engine compartment passenger’s side of the vehicle.-A second rem positive (+) terminal is located underseat fuse block. the red plastic cap to access the terminal. The remote negative (-) terminal is located near the power steering fluid reservoir.
Page 296 Battery fluid contains acid that can burn you. Don’t get it on you. you accidentally get it in on your skin, flush the place with your eyes water and get medical help immediately. Fans or other moving englne parts can injure you badly.
Page 297 7. Don’t let the other end touch metal. Connect it to the positive (+) terminal location of the vehicle with the good battery. Use a remote positive (+) terminal if the vehicle has one. 8. Now connect the black negative (-) cable to the negative (-) terminal location of the vehicle with the...
Page 298 Notice: Damage to yeur vehIc!e electrical shorting if jumper cables are removed incorrectly. To prevent electrical shorting, take care that the cables don't touch each other or any other metal. The repairs wouldn't be covered by your warranty. A. Dead Battery or Remote Positive (+) Terminal B.
Page 299: Headlamp Aiming
Headlamp Aiming Your vehicle has a visual optical headlamp aiming system equipped with horizontal aim indicators. The aim has been preset at the factory and should need no further adjustment. This is true even though your horizontal aim indicators may not fall exactly on the “0” (zero) marks on their scales.
Page 300 ,,nh;,-.ln chnm,lrl -ln--A uc y1aLt.u su I I 16 VGI I I L I G IUUIU to the wall or other flat surface. The vehicle should not have any snow, ice or mud attached to it. The vehicle should be fully assembled and all other work stopped while headlamp aiming The vehicle should be normally loaded with a full tank of fuel and one person or 160 Ibs (75 kg) on...
Page 301: Headlamp Horizontal Aiming
Headlamp Horizontal Aiming Turn the horizontal aiming screw (A) until the indicator (B) is lined up with zero. Once the horizontal aim is adjusted, then adjust the vertical aim. 5-52 Headlamp Vertical Aiming Nofice: Horizontal aiming must be performed before making any adjustments to the vertical aim. Adjusting the vertical aim first will result in an incorrect headlamp aim.
Page 302 A l n f h a - kn-rll-mn e n - s n u ' I J nlv=aulalllp m = u w w e . I n u L b w v G 1 cut-off when aiming. Covering a headlamp may cause excessive heat build-up which may cause damage to the headlamp.
Page 303 6. Repeat Steps 4 and for the opposite headlamp. 5. Turn the vertical aiming screw (C) until the headlamp beam is aimed to the horizontal tape line. The top edge of the cut-off should be positioned at the bottom edge of the horizontal tape line. 5-54...
Page 304: High Intensity Discharge (Hid) Lighting
For the proper type of replacement bulb, see Bulb Replacement on page 5-55. For any bulb changing procedure not listed in this section, contact your dealer. High Intensity Discharge (HID) Lighting The low beam high intensity discharge lighting system operates at a very high voltage. If you try to service any of the system components, you could be seriously injured.
Page 305 3. Remove the two bolts fastening the headlamp to 5. To replace the low-beam bulb, first remove the the headlamp mounting bracket. rubber housing cover on the rear of the lamp. 4. Pull the headlamp straight forward to disengage the locator pin at the outboard edge of the headlamp.
Page 307 8. After removing the wiring harness connector from the headlamp bulb socket, replace the bulb assembly. Reconnect it to the wiring harness and reinstall the headlamp bulb assembly back into the headlamp housing. 5-58 9. After reinstalling the bulb and socket, reinstall the rubber cover.
Page 308: Center High-Mounted Stoplamp (Chmsl)
1. The turn signai iamps are iocatea on the outboard side of the headlamps. To access, remove the headlamp. See Steps 1, 2,3, and 10 under Headlamps on page 5-55. 2. Press the bulb socket tab and turn the bulb socket counterclockwise to unlock the socket from the lamp housing.
Page 309: Taillamps And Turn Signal Lamps
Taillamps and Turn Signal Lamps 1. Open the trunk to gair access to the lamp housing. 2. Remove the rear 3. Move the spare tire cover out of the way. 4. Pull the trunk trim away to access the wing nuts. 5-60 compartment sill plate by removing the...
Page 310 For any buib not iisted here contact your dealer. 7. Press the bulb socket tab and turn the socket counterclockwise to remove it. To remove the bulb, grasp the socket firmly and pull the bulb out. Once you have replaced the burned-out bulb, reverse the steps to reassemble the lamp assembly.
Page 311: Windshield Wiper Blade Replacement
Windshield Wiper Blade Replacement Windshield wiper blades should be inspected at least twice a year for wear or cracking. See Wiper Blade Check under At Least Twice a Year on page 6-10 for more information. It's a good idea to clean or replace the wiper blade assembly on a regular basis or when worn.
Page 312: Tires
Your new venicie comes with high-quaiity tires made b y a leading tire manufacturer. If you ever have questions about your tire warranty and where to obtain service, see your Cadillac Warranty booklet for details. Poorly maintained and improperly used tires are dangerous.
Page 313 Inflation Tire Pressure The Tire-Loading Information label, which is located on the rear edge of the driver’s side rear door, shows the correct inflation pressures for your tires when they’re cold. “Cold” means your vehicle has been sitting for at least three hours or driven no more than 1 mile (1.6 km).
Page 314: Tire Pressure Monitor System
When to Check Check your tires once a month or more. Don’t forget your compact spare tire. It should be at 60 psi (420 kPa). How to Check Use a good quality pocket-type gage to check tire pressure. You can’t tell if your tires are properly inflated simply by looking at them.
Page 315: Tire Inspection And Rotation
Notice: Do not use a tire sealant if your vehicle is equipped with Tire Pressure Monitors. The liquid sealant can damage the tire pressure monitor sensors. Once a low or high tire pressure condition is detected, the TPM system will display the CHECK TIRE MESSAGE each time the engine is started, until the tire(s) are set to the correct inflation pressure.
Page 316 When rotating your tires, always use the correct rotation pattern shown here. Don’t include the compact spare tire in your tire rotation. After the tires have been rotated, adjust the front and rear inflation pressures as shown on the Tire-Loading Information label.
Page 317: Buying New Tires
When It Is Time for New Tires One way to tell when it’s time for new tires is to check the treadwear indicators, which will appear when your tires have only 1/16 inch (1.6 mm) or less of tread remaining. You need a new tire if any of the following statements are true: You can see the indicators at three or more places...
Page 318 Mixing tires could cause you to lose control while driving. If you mix tires of different sizes or types (radial and bias-belted tires), the vehicle may not handle properly, and you could have a crash. Using tires of different sizes may also cause damage to your vehicle. Be sure to use the same size and type tires on all wheels.
Page 319: Wheel Alignment And Tire Balance
Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and a half (1.5) times as well on the government course as a tire graded 100.
Page 320 Whet?! !?ep!acemena Replace any wneei that is bent, cracked or badly rusted or corroded. If wheel nuts keep coming loose, the wheel, wheel bolts and wheel nuts should be replaced. If the wheel leaks air, replace it (except some aluminum wheels, which can sometimes be repaired). See your dealer if any of these conditions exist.
Page 321: Tire Chains
Tire Chains If your vehicle has P235/55R17 size tires, dl use tire chains, there’s not enough clearance. Tire chains used on a vehicle without the proper amount of clearance can cause damage to the brakes, suspension parts. The area damaged by the tire chains could cause you to lose control of your vehicle and you or others may be injured in a crash.
Page 322: Changing A Flat Tire
A rear blowout, particularly on CLJWC?, skid and may require the same correction you’d use in a skid. in any rear biowout, remove your foot from the accelerator pedal. Get the vehicle under control by steering the way you want the vehicle to go. It may be very bumpy and noisy, but you can still steer.
Page 323 The following steps will tell you how to use the jack and change a tire. Removing the.Spare Tire and Tools The equipment you’ll need is in the trunk. Instructions for changing your tires are on the inside of the tire cover located in your trunk. 5-74 To gain access to the instructions, spare tire and jacking equipment, do the following:...
Page 324 3. Unscrew the wing nuts to remove the container that wrench holds jack. 4. Remove the wheel wrench, jack and compact spare tire from the trunk. See Compact Spare Tire on page 5-83 for more information about the compact firs cnQra -r-- &.I-.
Page 325 Removing the Flat Tire and installing the Spare Tire STS shown, SLS similar Using the wheel wrench, loosen all the wheel nuts. Don't remove them yet. 5-76 2. Find the jacking location from the diagram above and corresponding hoisting notches located in the plastic molding.
Page 326 Getting under a vehicle when dangerous. If the vehicle slips off the jack you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. Raising your vehicle with the jack improperly positioned can damage the vehicle and even make the vehicle fall.
Page 327 8. Remove any rust or dirt from the wheel bolts, mounting surfaces and spare wheel. Rust or dirt on the leel, or on the which it is fastened, can make the wheel nuts become loose after a time. The wheel could come off and cause an accident.
Page 328 Reinstall the wheel with the rounded end nuts toward .the wheel. Tighten each nut by hand until the wheel is held against the hub. nuts 11. Lower the vehicle by turning the jack handle counterclockwise. Lower the jack completely. 5-79...
Page 329 12. Tighten the wheel nuts firmly in a crisscross sequence as shown. Screw on the wheel nut covers with your fingers, then tighten one-quarter turn with the wheel wrench. 5-80 Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to come loose and even come off.
Page 330 Notice: Improperly tightened wheel nuts can !ead to brake pulsation and rotor damage. To avoid expensive brake repairs, eveniy tighten the wheei nuts in the proper sequence and to the proper torque specification. See “Capacities and Specifications” in the index for the wheel nut torque specification.
Page 331 Storing the Spare Tire and Tools Storing a jack, a tire or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place. The compact spare is for temporary use only.
Page 332 Gsmpact Spare Tire Although the compact spare tire was fully inflated when your vehicle was new, it can lose air after a time. Check the inflation pressure regularly. It should be 60 psi (420 kPa). After installing the compact spare on your vehicle, you should stop as soon as possible and make sure your spare tire is correctly inflated.
Page 333: Appearance Care
Appearance Care Remember, cleaning products can be hazardous. Some are toxic. Others can burst into flames if you strike a match or get them on a hot part of the vehicle. Some are dangerous if you breathe their fumes in a closed space.
Page 334 Your dealer hzs cleaners fs; the cleaning of fabric and carpet. They will clean normal spots and stains very well. You and get GM-approved cleaning products from your dealer. See GM Vehicle Care/Appearance Materials page 5-89. Here are some cleaning tips: Always read the instructions on the cleaner label.
Page 335: Care Of Safety Belts
Speaker Covers Vacuum around a speaker cover gently, so that the speaker won’t be damaged. Clean spots with just water and mild soap. Glass Surfaces Glass should be cleaned often. GM Glass Cleaner or a liquid household glass cleaner will remove normal tobacco smoke and dust films on interior glass.
Page 336 The best way preserve your vehicie’s finish is to keep clean by washing it often with lukewarm or cold water. Don’t wash your vehicle in the direct rays of the sun. Use a car washing soap. Don’t use strong soaps or chemical detergents.
Page 337: Sheet Metal Damage
Windshield and Wiper Blades If the windshield is not clear after using the windshield washer, or if the wiper blade chatters when running, wax, sap or other material may be on the blade or windshield. Clean the outside of the windshield with a full-strength glass cleaning liquid.
Page 338: Underbody Maintenance
Any stone chips, fractures or deep scratches in the finish should be repaired right away. Bare metal will corrode quickly and may develop into major repair expense. Minor chips and scratches can be repaired with touch-up materials avaliable from your dealer or other service outlets.
Page 339 GM Vehicle Care/Appearance Materials Description Polishing Cloth Interior and exterior Wax-Treated polishing cloth. Tar and Road Oil Removes tar, road oil and Remover asphalt. Chrome Cleaner and Use on chrome or Polish stainless steel. Removes soil and black White Sidewall Tire Cleaner marks from whitewalls.
Page 340: Vehicle Identification Number (Vin)
Vehicle Identification Number (VIN) This is the legal identifier for your vehicle. It appears on a plate in the front corner of the instrument panel, on the driver’s side. You can see it if you look through the windshield from outside your vehicle. The VIN also appears on the Vehicle Certification and Service Parts labels and the certificates of title and registration.
Page 341: Electrical System
Electrical System Add-on Electrical Equipment Nofice: Don’t add anything electrical to your vehicle unless you check with your dealer first. Some electrical equipment can damage your vehicle and the damage wouldn’t be covered by your warranty. Some add-on electrical equipment can keep other components from working as they should.
Page 342 The wiring circuits in your vehicie are protected from short circuits by a combination of fuses and circuit breakers. This greatly reduces the chance of fires caused by electrical problems. Look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse.
Page 343 Fuses Usage ALDL Accessory Windshield Wipers Not Used Headlamp Low Beam Left Headlamp Low Beam Right Instrument Panel Powertrain Control Module Battery Headlamp High Beam Right Headlamls Hiah Beam Left 5-94...
Page 345 To reinstall the rear seat cushion, do the following: 5-96 A safety belt that isn’t properly routed through the seat cushion or is twisted won’t provide the protection needed in a crash. If the safetybelt hasn’t been routed through the seat cushion at all, it won’t be there to work for the next passenger.
Page 346 3. With the seat cushion lowered, push rearward and then press down on the seat cushion until the bGth ends engage. spring !ocks 4. Check to make sure the safety belts are properly routed and that no portion of any safety belt is trapped under the seat.
Page 347 5-98 Magnetic Ride Control Heatina. Ventilation. Air Conditionina Ignition 3 Rear Antilock Brakina Svstem Turn SignaVHazard Heated Seat Right Rear Dash lntearation Module Relays Usage Fuel PumD Parking Lamps Ignition 1 Park Brake A Park Brake B Park Shift Interlock Reverse Lamps Retained Accessory Power for Sunroof...
Page 348 Relays Usage Interior Lamps The spare fuses and fuse puller are located in the underhood fuse block. See Underhood Fuse Block listed previously for more information. 5-99...
Page 349: Capacities And Specifications
Capacities and Specifications The following approximate capacities are given in English and metric conversions. Please refer to Pan' D: Recommended Fluids and Lubricants on page 6-15 for more information. En ine S ecifications DOHC V Canacities and Specifications 5-1 00...
Page 352 Section 6 Maintenance Schedule Introduction Your Vehicle and the Environment Maintenance Requirements How This Section is Organized ... -6-3 Part A: Scheduled Maintenance Services ... -6-4 Using Your Maintenance Schedule Scheduled Maintenance ... Part B: Owner Checks and Services At Each Fuel Fill At Least Once a Month At Least Twice a Year Maintenance Schedule...
Page 353: Maintenance Schedule
Maintenance Schedule Introduction IMPORTANT- KEEP ENGINE OIL AT THE PROPER LEVEL AND CHANGE AS RECOMMENDED Have you purchased the GM Protection Plan? The Plan supplements your new vehicle warranties. See your Warranty and Owner Assistance booklet or your dealer for details. Your Vehicle and the Environment Proper vehicle maintenance not only helps to keep your vehicle in good working condition, but also helps the...
Page 354 This riiaintenance schea’uie is divided into five parts: “Part A: Scheduled Maintenance Services” explains what to have done and how often. Some of these services can be complex, so unless you are technically qualified and have the necessary equipment, you should let your dealer’s service department or another jobs.
Page 355: Part A: Scheduled Maintenance Services
Part A: Scheduled Maintenance Services This part contains engine oil scheduled maintenance which explains the engine oil life system and how it indicates when to change the engine oil and filter. Also, listed are scheduled maintenance services which are to be performed at the mileage intervals specified. Using Your Maintenance Schedule We at General Motors want to keep your vehicle in good working condition.
Page 356 Footnotes The U S . Environmental Protection Agency nr the California Air Resources Board has determined that the failure to perform this maintenance item will not nullify the emission warranty or limit recall liability prior to the completion of the vehicle’s useful life. We, however, urge that all recommended maintenance services be performed at the indicated intervals and the maintenance be recorded.
Page 357 7,500 Miles (12 500 km) Rotate tires. See Tire inspection and Rotation on page 5-66for proper rotation pattern and additional information. (see footnote 15,000 Miles (25 000 km) Inspect engine air cleaner filter if you are driving in dusty conditions. Replace filter if necessary. An Emission Control Service.
Page 358 50,000 Miles (83 000 km! 0 Change automatic transaxle fluid and filter if the vehicle is mainly driven under one or more of these conditions: In heavy city traffic where the outside temperature regularly reaches 90°F (32°C) or higher. In hilly or mountainous terrain. When doing frequent trailer towing.
Page 359 90,000 Miles (150 000 km) 0 Replace passenger compartment air filter. If you drive regularly under dusty conditions, the filter may require replacement more often. U Inspect throttle body bore and valve plates for deposits, open the throttle valve and inspect all surfaces.
Page 361 At Least Twice a Year Restraint System Check Make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired.
Page 362 When you are doing this check, the vehicle could move suddenly. If it does, you or others could be injured. Follow the steps below. 1. Before you start, be sure you have enough room around the vehicle. 2. Firmly apply both the parking brake and the regular brake.
Page 363 Ignition Transaxle Lock Check While parked, and with the parking brake set, try to turn the ignition key to OFF in each shift lever position. The key should turn to OFF only when the shift lever is in PARK (P). The key should come out only in OFF.
Page 364: Steering, Suspension And Front Drive Axle Boot And Seal Inspection
Listed in this part are inspections and services which should be performed at least twice a year (for instance, each spring and fall). You should let your dealer's service depanlment or other qualified service center do these jobs. Make sure any necessary repairs are completed at once.
Page 365: Engine Cooling System Inspection
Engine Cooling System Inspection Inspect the hoses and have them replaced if they are cracked, swollen or deteriorated. Inspect all pipes, fittings and clamps; replace as needed. Clean the outside of the radiator and air conditioning condenser. To help ensure proper operation, a pressure test of the cooling system and pressure cap is recommended at least once a year.
Page 366 Fluids and lubricants identified below by name, part number or specification may be obtained from your dealer. Engine oil with the American Petroleum Institute Certified for Gasoline Engines starburst symbol Engine Oil of the proper viscosity. To determine the preferred viscosity for your vehicle’s engine, see Engine Oil on Baae 5- 15.
Page 367: Part E: Maintenance Record
Part E: Maintenance Record After the scheduled services are performed, record the date, odometer reading and who performed the service and any additional information from “Owner Checks and Services” or “Periodic Maintenance” on the following record pages. Also, you should retain all maintenance receipts. Maintenance Record 6-1 6...
Page 369 Maintenance Record (cont’d)
Page 370 Section 7 Customer Assistance Information ... Customer Satisfaction Procedure Customer Assistance for Text Telephone (TTY) Users Customer Assistance Off ices ... GM Mobility Program for Persons with Disabilities Roadside Service ... Customer Assistance Information 7. 2 Courtesy Transportation 7. 2 Reporting Safety Defects to the United States Government ...
Page 371: Customer Assistance Information
Information Customer Satisfaction Procedure Your satisfaction and goodwill are important to your dealer and to Cadillac. Normally, any concerns with the sales transaction or the operation of your vehicle will be resolved by your dealer’s sales or service departments. Sometimes, however, despite the best intentions of all concerned, misunderstandings can occur.
Page 372: Customer Assistance Off Ices
To assist customers who are deaf, hard of hearing, or speech-impaired and who use Text Telephones Cadillac has TTY equipment available at its Customer Assistance Center. Any TTY user can communicate with Cadillac by dialing: 1 -800-833-CMCC (2622). (TTY with any other users in Canada can dial 1-800-263-3830.)
Page 373 United States Cadillac Customer Assistance Center Cadillac Motor Car Division P.O. Box 33169 Detroit, MI 48232-51 69 1-800-458-8006 1-800-833-2622 (For Text Telephone devices (TTYs)) Roadside Assistance: 1-800-882-1 1 12 Fax Number: 3 1 3-38 1 -0022 From Puerto Rico: 1-800-496-9992 (English)
Page 374 1-800-GM-DRIVE (463-7483) for details. call 1-800-263-3830. Cadillac’s exceptional Roadside Service is more than an auto club or towing service. It provides every Cadillac owner with the advantage of contacting a Cadillac advisor and, where available, a Cadillac trained dealer technician who can provide on-site service.
Page 375 30 mile (50 km) radius of a participating Cadillac dealership. If beyond this radius, we will arrange to have your car towed to the nearest Cadillac dealership. Reaching Roadside Service Dial the toll-free Roadside Service number: 1-800-882-1 11 2.
Page 376 Warraniy service can generaiiy be completed whiie you v a u t : allu wait. However, if you are unable to wait Cadillac helps minimize your inconvenience by providing several transportation options. Depending on the circumstances, your dealer can offer you one of the following:...
Page 377 Courtesy Rental Vehicle When your vehicle is unavailable due to overnight warranty repairs, your dealer may arrange to provide you with a courtesy rental vehicle or reimburse you for a rental vehicle you obtained, at actual cost, up to a maximum of $37.00 per day supported by receipts.
Page 378 Motors In addition to notifying NHTSA (or Transport Canada) in a situation like this, we certainly hope you’ll notify us. Please call us at 1-800-458-8006, or write: Cadillac Customer Assistance Center Cadillac Motor Car Division P.O. Box 33169 Detroit, MI 48232-5169 In Canada, please call us at 1-800-263-3777 (English) or 1-800-263-7854 (French).
Page 379 Transmission, Transaxle, Transfer Case Unit Repair Manual This manual provides information on unit repair service procedures, adjustments and specifications for GM transmissions, transaxles and transfer cases. RETAIL SELL PRICE: $50.00 Service Bulletins Service Bulletins give technical service information needed to knowledgeably service General Motors cars and trucks.
Page 380 Accessory Power Outlets Adding Washer Fluid ... Additional Program Information ... Additives, Fuel ... Add-On Electrical Equipment Adjusting the Speakers (Balance/Fade) Air Bag Readiness Light ... Air Bag System, Supplemental Inflatable Restraint (SIR) ... Air CleanedFiIter, Engine All Overseas Locations Aluminum or Chrome-Plated Wheels AM ...
Page 381 High Intensity Discharge (HID) Lighting ... 5-55 Replacement Bulbs ... Taillamps and Turn Signal Lamps Buying New Tires ..4-37 5-43 3-21 ... 2-6 Cadillac Owner PrivilegesTM ... 4-22 California Fuel ... 6-10 Canada ... Canadian Owners ... 2-29 Capacities and Specifications ...
Page 382 Center High-Mounted Stoplamp (CHMSL) Chains. Ires System Light ... Charging Check Engine Light Checking Coolant Oil ... Checking Engine Checking Things Under the Hood ... 5-12 Checking Your Restraint Systems ... Chemical Paint Spotting Child Restraints Child Restraint Systems Infants and Young Children Lower Anchorages and Top Tethers for Children (LATCH System) Older Children...
Page 383: Climate Controls And Radio System Personalization
Customer Assistance Information Courtesy Transportation ... Customer Assistance for Text Telephone (TTY) Users Customer Assistance Off ices ... Customer Satisfaction Procedure ... GM Mobility Program for Persons with Disabilities ... Reporting Safety Defects to General Motors ... 7-9 Reporting Safety Defects to the Canadian Government ...
Page 384 Driving (cont.) Hill and Mountain Roads !?air! and !?cads \ ! : e t Winter ... Driving on Grades Driving on Snow or Ice Driving Through Deep Standing Water Driving Through Flowing Water Driving with a Trailer Dual Climate Control System ... Electrical System Add-on Equipment Fuses and Circuit Breakers...
Page 385 FabridCarpet ... Filter Engine Air Cleaner Finding a PTY Station (RDS and XMTM) Finding a PTY Station (XMTM Only) ... 3-75 Finding a Station ... Finish Care ... Finish Damage Flat Tire Flat Tire, Changing ... Floor Mats ... Fluid Automatic Transaxle ...
Page 386 Hazard Warning Flashers ... Head Restraints ... Headlamp Aiming ... Horizontal Aiming ... Vertical Aiming Headlamp High/Low-Beam Changer Headlamp Wiring ... Headlamps Bulb Replacement Front Turn Signal Lamps ... Halogen Bulbs ... High intensity Discharge (HID) Lighting Heated Seats ... Highway Hypnosis ...
Page 387 Inspection (cont.) Throttle System Instrument Panel Cluster ... Overview ... Instrument Panel Brightness ... Interior Lamps ... Interior Lamps Control ... Interior Plastic Components ... Jump Starting Key in Recall Memory ... Key Lock Cylinders Service ... Keyless Entry System ... Keys ...
Page 388 Locks Centrai Door Uniocking System Door ... Leaving Your Vehicle ... Lockout Protection ... Power Door ... Programmable Automatic Door Locks Rear Door Security Locks Loss of Control ... Lumbar Power Controls ... Magnetic Ride Control Magnetic Speed Variable Assist Steering Maintenance, Normal Replacement Parts ...
Page 389 Mirror to Curb In Reverse Mirrors Automatic Dimming Rearview Automatic Dimming Rearview and Compass ... Memory ... Outside Automatic Dimming Mirror ... 2-38 Outside Convex Mirror ... Outside Curb View Assist Mirror ... Outside Heated Mirrors ... Outside Power Mirrors ... Navigation System ...
Page 390 Part A Scheduled Maintenance Services Bart Ei Owner Checks and Services Part C - Periodic Maintenance !nspectinns Part D Recommended Fluids and Lubricants ... 6-15 Part E - Maintenance Record Passenger Compartment Air Filter ... 3-32 Passing ... PASS-Key@ Ill ... PASS-Key@ Ill Operation Performance Shift Display (STS Only) ...
Page 391 RDS Messages ... Reaching Roadside Service ... Reading Lamps ... Rear Ashtray ... Rear Climate Control System ... Rear Seat Passenger Positions ... Rear Seat Passengers, Safety Belts ... 1-19 Rear Seat Pass-Through Door Rear Underseat Fuse Block ... Rear Window Defogger ... Rearview Mirror, Automatic Dimming with Onstar@ ...
Page 392 Safety Belts (cont.) Rear Seat Passengers Right Front Passenger Positinn ... Safety Belt Extender Safety Belt Use During Pregnancy Safety Belts Are for Everyone Safety Chains Safety Warnings and Symbols Scheduled Maintenance ... 6-4 Seats Head Restraints Heated Seats Memory Power Lumbar Power Seats ...
Page 393 Storage Areas Cellular Telephone Center Console Storage Area ... Convenience Net ... Glove Box ... Map Pocket ... Umbrella Holder ... Storing the Flat Tire and Tools ... Storing the Spare Tire and Tools ... Stuck in Sand, Mud, Ice or Snow ... Sun Visors ...
Page 394 Traction Control System (TCS) Coniroi Sysiem Viarning Light Magnetic Ride Control Trailer Brakes Transaxle Fluid, Automatic ... Transaxle Operation, Automatic Transmission, Transaxle, Transfer Case Unit Repair Manual Transportation Options Trip Computer Oil Life Indicator ... Trip Odometers ... Trunk Trunk Lid Tie 50Wn ... Trunk Lock Release Turn and Lane-Change Signals...
Page 395 Warning Lights. Gages and Indicators Warnings DIC Warnings and Messages Hazard Warning Flashers Other Warning Devices Safety and Symbols Vehicle Damage Washing Your Vehicle ... Weather Band Weatherstrip Lubrication ... Weight of the Trailer ... Weight of the Trailer Tongue What Kind of Engine Oil to Use ...
Page 397 NOTES...
Page 399 NOTES...
Page 401 NOTES...

Cadillac 2003 Seville Owner's Manual

Section 2 Features and Controls

Section 3 Instrument Panel

Section 4 Driving Your Vehicle

Section Service and Appearance Care5

Section 6 Maintenance Schedule

Quick Links

Chapters

Related Manuals for Cadillac 2003 Seville

Summary of Contents for Cadillac 2003 Seville

Table of Contents