Setting The Custom Labels For The Input Connectors Of The Projector - Sony VPL-CH375 Operating Instructions Manual

-Subnet Mask: Input the subnet mask of
the projector.
-Default Gateway: Input the default
gateway of the projector.
-Primary DNS: Input the primary DNS
server of the projector.
-Secondary DNS: Input the secondary
DNS server of the projector.
MAC Address: Displays the MAC
address for USB wireless LAN
module.
Setting the Custom Labels for
the Input Connectors of the
Projector
Change the label names for the input
connectors that will be displayed on the
projected screen on the Setup page. The
entered label names will not be applied
unless you click on [Apply].
1
Click on [Advanced Menu] to open
the Setup page.
Advanced Menu button
2
Click on the [Input Label] and open
the Input Label setting window.
Clear the check box for the label that
you want to change and input the label
name. You can input up to 20 of the
following letters.
Alphabets: "a" to "z", "A" to "Z"
Numbers: "0" to "9"
Characters: ".", ", ", ":", ";", "!", "?", "'",
""", "#", "$", "%", "&", "@", "(", ")",
"<", ">", "[", "]", "{", "}", "|", "=", "*",
"+", "-", "/", "_", "\", "^", "`", "~",
space
Input Label button
Label name for the
input connector
3
Click the [Apply] button to apply
the set label names.
The label name will be reflected on the
screen when the input of the projector is
changed.
Input Connector Label Display Screen
Using Network Features
Use the
factory
default
setting
43