Screen Setup - Sony SLV-D500P Service Manual

QQ
3 7 63 1515 0
4 Press V/v to select the setup item from the displayed list:
"Dolby Digital," "DTS," or "Audio DRC."
5 Press B/b to select an item, then press O RETURN to confirm the setting.
6 Press O RETURN repeatedly to exit the menu.
Menu choices
• Dolby Digital (DVD only)
Selects the type of Dolby Digital signal.
The default setting is indicated in bold print.
D-PCM Select this when the player is connected to an audio component
lacking a built-in Dolby Digital decoder.
Dolby Digital Select this when the player is connected to an audio component
with a built-in Dolby Digital decoder.
• DTS (DVD only)
Selects whether or not to output DTS signals.
The default setting is indicated in bold print.
Off Select this when the player is connected to an audio component
lacking a built-in DTS decoder.
On Select this when the player is connected to an audio component
with a built-in DTS decoder.
• Audio DRC (Dynamic Range Control) (DVD only)
Makes the sound clear when the volume is turned down when playing a DVD that
conforms to "Audio DRC." This affects the output from the following jacks:
– LINE OUT AUDIO L/R jacks
– DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when "Dolby
Digital" is set to "D-PCM".
The default setting is indicated in bold print.
Standard Normally select this position.
TV Mode Makes the low sounds clear even if you turn the volume down.
TE
L 13942296513
60
Audio Setup

Screen Setup

"Screen Setup" allows you to set the screen
according to the playback and connection
conditions.
1
Press SET UP when the DVD player is in stop
mode.
The "SETUP MENU" appears.
2
Press V/v/B/b to select
then press ENTER.
The "DVD SETUP" menu appears.
www
3 Press V/v to select "Screen Setup," then press
ENTER.
.
62
Screen Setup
http://www.xiaoyu163.com
SET UP
V/v/B/b
ENTER
O RETURN
(DVD Setup),
x ao
y
i
http://www.xiaoyu163.com
8
Notes
• If you select surround setting while playing a DVD, the player does not output Dolby Digital
signals from the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack (when you set
"Dolby Digital" to "D-PCM").
• If you connect a component that does not conform to the selected audio signal, a loud noise
(or no sound) will come out from the speakers, affecting your ears or causing the speakers to
be damaged.
Q Q
3 6 7 1 3
4 Press V/v to select the setup item from the displayed list:
"TV Type," "Black Level," or "Video Out."
5 Press B/b to select an item, then press O RETURN to confirm the setting.
6
Press O RETURN repeatedly to exit the menu.
Menu choices
• TV Type (DVD only)
Selects the aspect ratio of the connected TV (4:3 standard or wide).
The default setting is indicated in bold print.
4:3 Letter Box
4:3 Pan Scan
16:9
4:3 Letter Box 4:3 Pan Scan
• Black Level
You can enhance the black level by increasing the brightness and contrast when
viewing DVDs with the PROGRESSIVE indicator turned off.
The default setting is indicated in bold print.
u163
On
Off
.
1-14
2 9 9 4 2 8
1 5 0 5 8 2 9 9 4
Audio Setup
Select this when you connect a 4:3 screen TV. Displays a wide
picture with bands on the upper and lower portions of the screen.
Select this when you connect a 4:3 screen TV. Automatically
displays the wide picture on the entire screen and cuts off the
portions that do not fit.
Select this when you connect a wide-screen TV or a TV with a wide
mode function.
16:9
m
co
Increases the contrast.
Stops the increase of the contrast.
continued
Screen Setup
9 9
2 8 9 9
61
63