Advanced Hookups - Sony SLV-D500P Service Manual

QQ
3 7 63 1515 0
7 Press B/b to select the tape speed, Auto, SP,
or EP.
8
Press ENTER to confirm the setting.
To enter another setting, repeat steps 1 to 7.
9
Press O RETURN to exit the menu.
10 Press ?/1 to turn off the VCR.
The timer indicator appears in the display window and the VCR stands by
for recording. When using a cable box, leave it on.
To stop recording
To stop the VCR while recording, press x STOP.
To use the DVD-VCR after setting the timer
To use the DVD-VCR before a timer recording begins, just press ?/1. The timer
indicator disappears from the display window and the DVD-VCR switches on.
Remember to press ?/1 to reset the VCR to the timer recording standby mode after
using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 38).
• Display tape information on the TV screen (page 40).
• Check the timer settings (page 53).
• Watch another TV program (page 41).
Tip
• To check, change or cancel the program setting, see "Checking/changing/canceling timer
settings" on page 53.
Note
• If the VCR does not accept the PlusCode number, this means that:
– The PlusCode number is incorrect.
– ONCE, MO~FR, or Weekly was selected incorrectly. You cannot select MO~FR or Weekly
for a program that airs more than seven days ahead.
Correctly set the PlusCode number again from step 2.
• When the PlusCode number is incorrect, "Invalid Code" will appear in the display.
TE
L 13942296513
52
Recording TV programs using the VCR Plus+ ® system
2 Press V/v/B/b to select
• If you want to change a setting, go on to the next step.
• If you do not need to change the settings, press O RETURN repeatedly
to exit the menu, then turn off the VCR to return to recording standby.
3 Press V/v to select setting you want to change
or cancel.
• To change the setting, press B/b to flash the
item you want to change, and press V/v to
change it.
• To cancel the setting, press CLEAR.
4
Press O RETURN to confirm the setting.
The indicator appears in the display window.
5
Press O RETURN repeatedly to exit the menu.
The DVD-VCR stands by for recording (you do not have to turn off the
DVD-VCR). When using a cable box, leave it on.
When the timer settings overlap
The program that starts first has priority and the second program starts recording only
after the first program has finished. If the programs start at the same time, the
program listed first in the menu has priority.
Program 1
Program 2
Will be cut off
www
.
54
Checking/changing/canceling timer settings
http://www.xiaoyu163.com
"Set Timer Recording", then press ENTER.
x ao
y
i
http://www.xiaoyu163.com
8
Checking/changing/canceling timer
settings
1
Press SET UP when the DVD player is in stop
mode.
The "SETUP MENU" appears.
You can also use the TIMER button in VIDEO
mode, then you can skip step 2.
Q Q
3 6 7 1 3

Advanced Hookups

A/V Receiver hookup
A Use this hookup if your A/V receiver has a Dolby* Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio
or multi-channel audio (Dolby Digital) discs.
∗ Manufactured under license from Dolby Laboratories. "Dolby," "Pro Logic," and the double-
D symbol are trademarks of Dolby Laboratories.
DVD-VCR
(red)
(white)
to LINE OUT L/R (AUDIO)
l: Signal flow
to audio input
[Speakers]
Rear (L) Rear (R)
u163 Subwoofer
Note
.
• When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear
speakers and a subwoofer.
1-12
2 9 9 4 2 8
?/1
CLEAR
SET UP
TIMER
V/v/B/b
ENTER
O RETURN
1 5 0 5 8 2 9 9 4
continued
Checking/changing/canceling timer settings
Stereo audio cord
(not supplied)
(white) (red)
[Speakers]
Amplifier (receiver) with Dolby
Surround decoder
m
Front (L)
Front (R)
co Center Rear (mono)
continued
A/V Receiver hookup
9 9
2 8 9 9
53
55