Sony SLV-D500P Service Manual page 17

QQ
3 7 63 1515 0
2 Press H PLAY.
The disc tray closes and the
DVD player starts playback.
The display window shows the
playback time
Depending on the disc, a menu
may appear on the TV screen.
For DVDs, see page 70. For VIDEO CDs, see page 90.
* "– – – – –" appears when no disc is loaded.
Additional tasks
To
Stop play
Pause play*
Resume play after pause
Advance by frame in pause mode
Go to the next chapter, track, or scene
in continuous play mode
Go back to the previous chapter, track,
or scene in continuous play mode
Stop play and remove the disc
* If you pause the DVD player for more than 5 minutes, the DVD player will automatically stop.
To Resume playback for the current disc (Resume Play)
The DVD player remembers the point where you stopped the disc even if the DVD
player enters standby mode by pressing ?/1.
1
While playing a disc, press x STOP to stop playback.
2 Press H PLAY.
The DVD player starts playback from the point where you stopped the disc in
Step 1.
To locate a point quickly by playing a disc in fast forward or fast reverse
in continuous play mode (DVD, VIDEO CD and CD only)
Press m or M.
For DVD or Video CD, each time you press the button, the playback speed changes
as follows.
× 2 t × 4 t × 8 t × 16 t × 32 t × 128 (DVD only)
Release the button at the desired speed.
For CD, the searching speed does not change (× 8 play).
When you find the point you want, press H PLAY.
TE
L 13942296513
32
Playing discs
Guide to the on-screen display
You can check disc information during
playback.
The displayed contents differ according to
the type of disc being played.
Press DISPLAY. The following information appears; type of disc, current title/track,
chapter, counter position, voice language, subtitle language and surround setting.
Refer to "DVD Audio/Subtitle Language" on page 117 for the abbreviation of the
language.
You can playback the desired title/track, chapter or counter position using this menu.
To playback the desired title/track or chapter
1 Press V/v to select the desired item.
2 Press B/b to change the item.
3
Press ENTER to start playback.
4 Press DISPLAY or O RETURN to turn off the menu.
www
The title/track or chapter icon will appear on the DVD playback screen followed by
the current title/track or chapter number and the counter positon.
.
34
Guide to the on-screen display
http://www.xiaoyu163.com
.
*
Hour Minute Second
Press
x STOP
X PAUSE
H PLAY
C SKIP
> on the remote
. on the remote
Z
V/v/B/b
ENTER
O RETURN
DISPLAY
Type of disc
Current title/track number
Current chapter number
Counter position
Voice language
Subtitle language
Surround setting
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
To watch slow motion in continuous play mode (DVD and VIDEO CD
only)
Press X PAUSE, then press M SLOW y. With each press, the playback speed
changes cyclically as follows.
To resume normal playback, press H PLAY.
Notes
• You can change the screen type using the "SCREEN SETUP" menu. (See "Screen Setup" on
page 62)
• Do not perform VIDEO playback while playing back a disc.
• If you play a DVD or VIDEO CD that has scratches, the player may stop playback at the
point of the scratch.
• You cannot change the MP3 or the Multi Session CD playback speed.
• VIDEO CD fast forward/reverse and slow motion play cannot be paused.
• When playing a chapter with multi-angles on a DVD in slow motion, you cannot change the
slow motion playback speed (1/2 only).
• During CD fast forward/reverse play, no sound is output.
• The PROGRESSIVE button is not available when the DVD player is in play mode. Use the
PROGRESSIVE button in stop mode
Notes on playing DTS* sound tracks on a CD
• When playing DTS-encoded CDs, excessive noise will be heard from the analog stereo jacks.
To avoid possible damage to the audio system, the consumer should take proper precautions
when the analog stereo jacks of the DVD player are connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an external 5.1-channel decoder system must be
connected to the digital jack of the DVD player.
• Set the sound to "STEREO" using the AUDIO button when you play DTS sound tracks on a
CD (page 80).
• Do not play DTS sound tracks without first connecting the DVD player to an audio
component having a built-in DTS decoder. The DVD player outputs the DTS signal via the
DIGITAL AUDIO OUT (COAXIAL or OPTICAL) jack even if "DTS" is set to "Off" in
"AUDIO SETUP" menu (page 60), and may affect your ears or cause your speakers to be
damaged.
Notes on playing DVDs with a DTS sound track
• DTS audio signals are output only through the DIGITAL AUDIO OUT (COAXIAL or
OPTICAL) jack.
• When you play a DVD with DTS sound tracks, set "DTS" to "On" in "AUDIO SETUP"
menu (page 60).
• If you connect the player to audio equipment without a DTS decoder, do not set "DTS" to
"On" in "AUDIO SETUP" menu (page 60). A loud noise may come out from the speakers,
affecting your ears or causing the speakers to be damaged.
* "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
Q Q
3 6 7 1 3 1 5
To playback from the desired counter position
1 Press V/v to select the counter position icon.
2
Enter the desired position using the number buttons.
3
Press ENTER to start playback.
4 Press DISPLAY or O RETURN to turn off the menu.
Tip
• You can change the counter position information (playing time or remaining time) using
B/b
(DVD and CD only).
Notes
• The display may not change as operated depending on the disc.
• The display window continue indicating the playing time even when the counter position
information on the on-screen display is being changed.
co
.
1-7
9 4 2 8
.
0 5 8 2 9 9 4 2 8
m
Guide to the on-screen display
9 9
9 9
33
Playing discs
35