Miele T 8164 WP Operating Instructions Manual page 20

How to dry correctly
 Select a programme
 Turn the programme selector clock‐
wise or anti-clockwise to the required
programme.
 Start the programme.
 Press the Start button.
The indicator light for the Start button
will now light up constantly.
Notes
– The programme duration shown in
the display is an estimation and can
vary.
– This dryer measures residual mois‐
ture content in the laundry to ensure
perfect drying results. However, if dry
laundry is loaded into the drum, it will
be dried/aired for a set duration.
Avoid overdrying items of laundry as
these can become damaged.
20
 Remove the laundry when the pro‐
gramme has finished
There is a cooling down phase at the
end of the drying sequence The pro‐
gramme is not finished until  lights up
and the buzzer sounds.
The drum will continue to rotate at in‐
tervals for up to two hours to prevent
laundry creasing, if you do not wish to
remove it immediately (anti-crease
phase). There is no anti-crease phase at
the end of the Woollens programme.
The duration of the cooling down phase
is variable; see "Settings".
 Press the Door button.
 Open the door.
 Remove the laundry.
Check that all items have been re‐
moved from the drum. If items are
left in the dryer, they could be dam‐
aged by overdrying when the dryer is
next used.
 Press the  button to switch the
dryer off.
 Clean the fluff filters
 Close the door.
 Empty the condensed water contain‐
er.