1.3.64 SVM (Simplified Voice Message)
Redirecting Your Calls to Your Message Box
You can set incoming calls to be redirected to your own message box so that callers can leave voice messages
when you cannot answer the phone.
To set/cancel
PT/SLT/PS/KX-HGT100
Off-hook.
floating extension no.
for the SVM feature
Enter floating extension
number for the SVM feature.
•
The default floating extension number for the SVM feature is 591.
Leaving Voice Messages
If the extension user you called is not able to answer your call, and your call is redirected to the message box,
you will hear the greeting message. Then, you can leave a voice message for that extension. It is also possible
to leave a voice message directly in the message box of a desired extension by following the steps below:
130
Operating Manual
0
OR
7
1
1
OR
2
Enter
71.
Enter 0 to 2 as you desire.
#
Enter #.
Both Calls
0
2
Outside Calls
3
4
Intercom Calls
5
Enter required number.
For "Cancel", go on-hook
directly after entering 0.
C.Tone
On-hook.
Cancel
All Calls
Busy
No Answer
Busy/No Answer
Document Version 2013-05