Lenovo THINKCENTRE 3317 Hardware Maintenance Manual page 87

8. Lift the microprocessor straight up and out of the socket.
Notes:
a. Your microprocessor and socket might look different from the one illustrated.
b. Note the orientation of the microprocessor in the socket. You can look for the small triangle
on one corner of the microprocessor. This is important when installing the new microprocessor
on the system board.
c. Touch only the sides of the microprocessor. Do not touch the gold contacts on the bottom.
d. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be
kept as clean as possible.
1
.
Chapter 8 Replacing FRUs
81