Table of Contents
Advertisement
3.Product conditions
3-1 Flash adjustment (when Flash unit is replaced)
• Make sure to implement these adjustments whenever the Flash unit has been exchanged.
1. Equipment or facility required
(1) A dark room.
(2) An AC adaptor.
(3) Gray paper (Color: Oxford Grey No. 22 of Superior Specialties Inc.)
There are two sizes of the paper available as registered parts (They can be purchased at camera
shops as well.)
Part code
1904 5411 Background paper for photography (Superior Specialties Inc.)
1904 5412 Background paper for photography (Superior Specialties Inc.)
2. Conditions
(1) Make sure to execute the adjustment in a dark room.
(2) Set a distance of one meter between a surface of the flash lens and the gray paper.
(3) Use a light-colored surface of the gray paper for image taking.
Size of the gray paper should be larger than the area viewed from a camera within a distance of one-
meter.
(Reference: 1.5 meter x 2.0 meter or larger)
3. Adjustment
(1) Connect an AC adaptor to the camera.
(2) Set REC mode.
(3) Activate MENU 2 of the TEST mode.
Turn the power on while pressing the DISP and MENU keys simultaneously.
Quickly press keys in the order of SELF, SELF and MENU.
(4) Select STROBE ADJUST using + (plus) and –(minus) keys, and then click the shutter for execution.
(5) Turn the light off as soon as "STROBE" indication appears on the upper right of the monitor. Then set
the conditions as above and press the shutter.
(6) The flash emits light more than four times.
(7) Confirm if the following indications are displayed, and then turn the power off.
EEP WR OK
PWM
XXX
(8) Activate the TEST mode.
Turn the power on while pressing DISP and MENU keys.
(9) Confirm if the item of STROBE ADJ is indicated as "YES".
(10) Turn the power off for completion.
4. Block diagram
Part name
XX
1 meter
— 10 —
Background paper for photography
Color Number and
standard size
(unit: meter)
No. 22 (1.75 x 2.7)
No. 22 (2.72 x 11)
Advertisement
Table of Contents
