Casio QV-770 Owner's Manual

LCD Digital Camera
QV-770
CASIO COMPUTER CO.,LTD.
Owner's Manual 6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
To Record Images (page 20)
1
Slide the Function
Switch to REC.
3
Set the NORMAL/
MACRO switch to
(NORMAL)
position.
• Use (Macro) when
the subject is located
about 15 cm (about 6
4
inches ) from the lens
(see page 24).
Press button to select resolution setting you want.
• Each press of button cycles through the resolution setting in the
following sequence: (Fine) (Normal) (Economy).
If you need help with
your camera, please
call: 1(800)435-7732
英

QUICK REFERENCE

2
Slide the POWER Switch
to the right to turn on the
camera.
5
Compose the image
on the monitor
screen and then
press the shutter
button.
3
QUICK REFERENCE
To load batteries (page 16)
Be sure to load four AA size batteries that come with this camera before using it.
1
Slide the battery compartment
lock on the bottom of the camera
1 1 1 1 1
( ), and open the battery com-
2 2 2 2 2
partment cover ( ).
• Be sure to use Alkaline or Lithium batteries. Never use manganese batteries.
• Press down on the battery compartment cover at the point marked
cover locks into place with a click.
2
QUICK REFERENCE
To Playback Images (page 33)
2
Slide the POWER Switch to the right.
• The image you recorded appears on the LCD.
1
Slide the Function
Switch to PLAY.
4
2
Load four batteries and close the battery compart-
ment cover.
A A A A A
in the above illustration until the
3
Use [+] and [–] to scroll
through the images stored
in camera memory.
The camera may contain pre-recorded demonstration images
when you purchase it. To delete these images, see page 5.