Table of Contents
Advertisement
9.10
Message Alert tone
When the message alert tone is set to on, the telephone base beeps every 10 seconds to alert you to
new messages. The tone stops when all new messages have been reviewed.
to change the setting:
1.
Press
MenU
when the phone is not in use.
p q
2.
Press
to scroll to AnsweringSys, then press Select.
p q
3.
Press
to scroll to Ans sys setup, then press Select.
p q
4.
Press
to scroll to Msg alert tone, then press Select.
p q
5.
Press
to choose on or off.
6.
Press
Set
to save and you hear a confirmation tone.
noteS
•
You cannot set the message alert tone when another handset or the telephone base is accessing
the answering system.
•
The message alert tone beeps only if all the conditions below are met.
>Answering system is on.
>Message alert tone setting is on.
>There are new messages.
9.10.1
temporarily turn off the Message Alert tone
If the message alert tone is turned on, the telephone base beeps every 10 seconds when there are new
messages. Pressing any telephone base key (except /PAGe) temporarily silences the message alert tone.
9.11
Recording time
You can set the recording time limit for each incoming message.
to change the setting:
1.
Press
MenU
when the phone is not in use.
p q
2.
Press
to scroll to AnsweringSys, then press Select.
p q
3.
Press
to scroll to Ans sys setup, then press Select.
p q
4.
Press
to scroll to Recording time, then press Select.
p q
5.
Press
to choose 3 minutes, 2 minutes, or 1 minute.
6.
Press
Set
to save and you hear a confirmation tone.
63
Advertisement
Table of Contents
