Table of Contents
Advertisement
2.5
Install and charge the Handset batteries
1.
Slide open the battery compartment cover.
2.
Place the supplied rechargeable battery in the battery compartment, with the battery connector
plugged in, as shown.
3.
Slide the battery compartment cover back on until it clicks into place.
4.
Place the handset on the base to charge for at least 16 hours. The Charging LED lighting up
indicates that the handset is properly placed on the base.
noteS
•
Use only the supplied NiMH rechargeable batteries.
•
If you do not use the handset for a long time, disconnect and remove the batteries to prevent
possible leakage.
cHARGe
remains on
when charging.
6
light
Advertisement
Table of Contents
