Lenovo ThinkServer RD440 User Manual And Hardware Maintenance Manual page 156

9. Remove the protective cover that protects the gold contacts on the bottom of the new microprocessor.
Do not touch the pins on the microprocessor socket and the gold contacts on the bottom of the new
microprocessor.
Figure 92. Do not touch the pins
10. Note the orientation of the new microprocessor. Hold the new microprocessor by its edges and align
1 2
the notches on it with the tabs in the microprocessor socket. Then, carefully lower the new
microprocessor straight down into the microprocessor socket.
Note: The small triangle 3 on one corner of the new microprocessor is the microprocessor orientation
indicator. The new microprocessor is in the correct orientation when this indicator faces the beveled
corner 4 of the microprocessor socket.
Figure 93. Installing the microprocessor
144
ThinkServer RD440 User Guide and Hardware Maintenance Manual