Lenovo ThinkServer RD440 User Manual And Hardware Maintenance Manual page 10

Statement 11
CAUTION:
The following label indicates a potential heat hazard.
Statement 12
DANGER
Overloading a branch circuit is a potential fire hazard and a shock hazard under certain conditions. To
avoid these hazards, ensure that your system electrical requirements do not exceed branch current ratings
at the installation site.
Statement 13
CAUTION:
Ensure that the rack is secured properly to avoid tipping when the server unit is extended on the rails.
Statement 14
CAUTION:
Some accessory or option board outputs exceed Class 2 or limited power source limits. You
must install the appropriate interconnecting cabling in accordance with your local electrical code
requirements.
Statement 15
CAUTION:
The power-control button on the device may put the device in standby mode instead of turning off
the device. In addition, the device might have multiple connections to dc power. To remove all
electrical current from the device, ensure that all connections to dc power are disconnected at
the dc power input terminals.
viii
ThinkServer RD440 User Guide and Hardware Maintenance Manual