Ec Declaration Of Conformity - Flymo SAMURAI 1000XT Original Instructions Manual

If any part is found to be defective due to faulty manufacture within
the guarantee period, Husqvarna UK Ltd., through its Authorised
Service Repairers will effect the repair or replacement to the
customer free of charge providing:
(a) The fault is reported directly to the Authorised Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or faulty adjustment
by the user.
(d) The failure has not occurred through fair wear and tear.
(e) The machine has not been serviced or repaired, taken apart or
tampered with by any person not authorised by Husqvarna UK
Ltd..
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used commercially.
* This guarantee is additional to, and in no way diminishes the
customers statutory rights.
Failures due to the following are not covered, therefore it is important
that you read the instructions contained in this Operator's Manual
and understand how to operate and maintain your machine:
Husqvarna AB, 561 82 Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Category........................................ Lawn Trimmer
Model(s)......................................... TMET1000XT
Identification of Series................... See Product Rating Label
Year of Construction...................... See Product Rating Label
Complies with the essential requirements & provisions of the following EC Directives:
2006/42/EC, 2004/108/EC, 2000/14/EC, 2011/65/EU
based on the following EU harmonised standards applied:
EN60335-1, EN60335-2-91, EN50366, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3
The maximum A weighted sound pressure level L
given in the table.
The maximum hand / arm vibration weighted value a
product(s) is given in the table.
2000/14/EC: The Measured Sound Power L
figures.
Conformity Assessment Procedure.................. Annex VI
Notified Body.................................................... Intertek, Cleeve Road
Huskvarna 12/02/2013
A. Rangert,
Global R&D Director - Hand held
Keeper of technical documentation.
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Copyright © 2013 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered trademarks
5101350-03
Guarantee & Guarantee Policy

EC Declaration of Conformity

at the operator's position, measured according to EN60335-2-91 is
pA
measured according to EN ISO 20643 on a sample of the above
h
& Guaranteed Sound Power L
WA
Leatherhead, Surrey
KT22 7SB, England
Type
Width of Cut (cm)
Speed of rotation of cutting device (rpm)
Power (kW)
Measured Sound Power L
Guaranteed Sound Power L
Sound pressure L (dB(A))
pA
Uncertainty K (dB(A))
pA
Hand / arm vibration a (m/s
h
Uncertainty K (m/s 2 )
ah
Weight (kg)
Husqvarna AB,
S-561 82
Huskvarna,
of Flymo S.A.
Failures not covered by guarantee
* Replacing Nylon Line.
* Failures as a result of not reporting an initial fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product in accordance with
the instructions and recommendations contained in this
Operator's Manual.
* Machines used for hire are not covered by this guarantee.
* The following items listed are considered as wearing parts and
their life is dependent on regular maintenance and are,
therefore not normally subject to a valid warranty claim: Nylon
Line, Spool and Line, Electric Mains Cable
* Caution!
Husqvarna UK Ltd. does not accept liability under the warranty
for defects caused in whole or part, directly or indirectly by the
fitting of replacement parts or additional parts that are not
either manufactured or approved by Husqvarna UK Ltd., or by
the machine having been modified in any way.
values are according to the tabulated
WA
TMET800
7,300
1.0
(dB(A))
WA
(dB(A))
WA
2.5
3.16
2 )
1.5
5.5
Sweden
35
95
96
83