Resuming Operation - Panasonic Toughbook CF-27 Series Reference Manual

Suspend/Hibernation Functions
NOTE
With the method below, you can shut down the computer by using the suspend
function.
Fn + F7 (

Resuming Operation

Slide the power switch
If the security indicator (
This password has been set in the Setup Utility and is not an NT password.
CAUTION
After the display returns, the computer needs a short period of time to reinitialize.
This takes about 15 seconds. Do not shut down or restart Windows, or use the
suspend or hibernation functions again during this time, as this may subse-
quently cause Windows to operate abnormally.
Do not install or remove peripherals while your computer is in the suspend or
hibernation mode; abnormal operation may result.
When operation resumes, serial devices such as a mouse, modem or PC Cards
may not function properly. In such cases, you will need to restart your computer
or reinitialize the individual devices.
Do not use the suspend or hibernation function when using the network func-
tion.
Avoid the following until the power is completely turned off when turning off the
computer by using the suspend or hibernation functions, or resuming operation
by sliding the power switch from the suspend or hibernation.
• Touch the keyboard (excluding password input), touch pad, or power switch.
• Connect the AC adapter.
• Close the display.
page 2)
) is displayed, your password has been set.
5