Adding Memory - Panasonic Toughbook CF-27 Series Reference Manual

Adding Memory

RAM Module
2
Hooks
2
CAUTION
Use a RAM module meeting the RAM module specifications below. If a module is
used that does not meet the specifications, there are cases in which data may
become unusable or the computer may not operate properly.
RAM modules are extremely sensitive to static electricity. There are cases where
static electricity generated by the human body has adversely affected such mod-
ules. In addition, it is easy to damage the RAM modules or internal components of
the computer. Therefore, when installing or removing a RAM module, handle the
module with extreme care.
Installing/Removing the RAM Module
1
Power off your computer
Do not shut down using the suspend or hibernation mode.
2
Remove the cover
3
Installing the RAM module
Slide in the module at an angle.
2
Snap the module into place by pushing down on it.
RAM module specifications
144 pins, SO-DIMM, 3.3 V, SDRAM
Removing the RAM module
Open the left and right hooks.
Gently remove the RAM module from the slot.
2
4
Put the cover back into place
( "Starting Up/Shutting Down")
( page 16)
( page 17
22
)