Vertical Misalignment Or Banding - Epson Stylus C41 Series User Manual

Check the
appropriate ink cartridge.
See "Replacing Ink Cartridges" on page 157.
Make sure that Maximum is not selected as the Printable Area
setting in your printer software. When this setting is selected,
banding may occur in the expanded area.
Make sure that the Media Type selected in the printer
software is appropriate for the type of media loaded in the
printer.
Make sure the MicroWeave check box is selected when
available in the Advanced dialog box.
For Windows users, "Making Advanced settings" on page
51
For Macintosh users, "Making Advanced settings" on page
81

Vertical misalignment or banding

Try one or more of these solutions:
Make sure that the printable side of the paper is face up in the
sheet feeder.
Run the Print Head Alignment utility. "Aligning the Print
Head" on page 135
Clear the High Speed check box in the Advanced dialog box.
Run the Head Cleaning utility to clear any clogged ink
nozzles.
"Cleaning the Print Head" on page 129
Make sure that the Media Type setting selected in the printer
software is appropriate for the type of media loaded in the
printer.
182
Troubleshooting
b
error light. If the light is flashing, replace the